User manual YAMAHA RX-V2300

[. . . ] U RX-V2300 AV Receiver OWNER'S MANUAL IMPORTANT SAFETY INSTRUCTIONS 10 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 11 · Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 12 13 1 2 3 4 5 6 7 8 9 Read Instructions ­ All the safety and operating instructions should be read before the product is operated. Retain Instructions ­ The safety and operating instructions should be retained for future reference. [. . . ] This program is for reproducing sounds from 70-mm and multichannel soundtrack films, and is characterized by a soft and extensive sound field. The presence sound field is relatively narrow. It spatially spreads all around and toward the screen, restraining the echo effect of conversations without losing clarity. This program ideally simulates the multi-surround speaker systems of the 35-mm film theaters. Dolby Pro Logic decoding, Dolby Digital decoding or DTS decoding and digital sound field processing create precise effects without altering the original sound orientation. The surround effects produced by this sound field wrap around the viewer naturally from the back to the left and right, and toward the screen. The built-in decoder precisely reproduces sounds and sound effects from sources. The highly efficient decoding process improves crosstalk and channel separation and makes sound positioning smoother and more precise. In this program, no DSP effect is applied. To reproduce 2 channel sources decoding into multichannels in each decoding mode. Sci-Fi 10 CINEMA DSP MOVIE THEATER 2 Adventure General For movie programs 11 DOLBY DIGITAL DTS DIGITAL SUR PRO LOGIC Enhanced Enhanced Enhanced 11 DOLBY DIGITAL DTS DIGITAL SUR Normal Normal STRAIGHT DECODE PRO LOGIC PRO LOGIC Normal Movie Music DTS Neo:6 Cinema Music 36 DIGITAL SOUND FIELD PROCESSING (DSP) Table of Program Names for Each Input Format Input 2 channel Stereo No. 9 Program MOVIE THEATER 1 70 mm Spectacle 70 mm Sci-Fi 10 MOVIE THEATER 2 70 mm Adventure 70 mm General 11 DOLBY DIGITAL -- -- DTS DGTL SUR -- DOLBY DIGITAL DOLBY DIGITAL EX decoder: inactive (off) DGTL Spectacle DGTL Sci-Fi DGTL Adventure DGTL General Normal Enhanced -- DOLBY DIGITAL EX decoder: active (on) Spectacle EX Sci-Fi EX Adventure EX General EX Dolby D EX EX Enhanced -- DTS ES decoder: inactive (off) DTS Spectacle DTS Sci-Fi DTS Adventure DTS General -- -- Normal DTS DTS ES decoder: active (on) Spectacle ES Sci-Fi ES INTRODUCTION PREPARATION Adventure ES General ES -- -- ES Matrix 6. 1*1 ES Dscrt 6. 1 *2 Enhanced ES -- -- -- BASIC OPERATION -- PRO LOGIC Normal Enhanced PRO LOGIC Movie Music DTS Neo: 6 Cinema Music -- -- -- -- -- -- -- -- -- -- -- -- -- -- Enhanced -- -- -- -- -- -- ADVANCED OPERATION -- -- -- *1 means the DTS ES Matrix decoder is active. *2 means the DTS ES Discrete decoder is active. ADDITIONAL INFORMATION y · If a Dolby Digital signal or DTS signal is input when the input mode is set to AUTO, the DSP program will be automatically switched to the Dolby Digital playback sound field or DTS playback sound field. · If Dolby Digital Surround EX software or DTS ES software is played when AUTO is selected by pressing the EX/ES button on the remote control, the Dolby Digital EX or DTS ES decoder will automatically turn on and the corresponding DSP program will be selected. · EX/ES on the remote control can be used to play Dolby Digital or DTS 5. 1 channel sources with rear center speaker. In this case the program name changes to the corresponding name for 6. 1 channel. · When playing 6. 1 channel source with EX/ES on the remote control off, the program name changes to the corresponding name for 5. 1 channel. APPENDIX Note · The " " indicator does not light up when selecting the program No. 11 except for the Enhanced mode. English 37 TUNING Automatic and Manual Tuning There are 2 ways of tuning; automatic and manual. Automatic tuning is effective when station signals are strong and there is no interference. 4 I Automatic tuning Press PRESET/TUNING l / h once to begin automatic tuning. Press h to tune in to a higher frequency, or press l to tune in to a lower frequency. Press the same button again if the tuning search does not stop at the desired station. PRESET/ TUNING VCR 1 CBL/SAT D TV/LD DVD MD/TAPE CD R TUNER TUNED CD AUTO 1 VOLUME SP A A~~AM~1404 ~ NATURAL SOUND AV RECEIVER RX-V2300 DIGITAL STANDBY /ON 6CH INPUT MODE When tuned in to a station, the "TUNED" indicator lights up and the frequency of the received station is shown on the front panel display. TUNING MODE SOURCE /REMOTE DVD MD/TAPE D­TV/LD CD­R A/B/C/D/E PRESET/ TUNING PRESET /TUNING FM/AM MEMORY BASS TREBLE SPEAKERS A B PROCESSOR BASS DIRECT EXTENSION CBL/SAT VCR 1 VCR2 /DVR V­AUX TUNER CD PHONO EDIT PHONES MAN'L/AUTO FM AUTO/MAN'L MONO S VIDEO VIDEO L AUDIO R OPTICAL STEREO PROGRAM y ­ + ­ + REC OUT /ZONE 2 EFFECT SILENT VIDEO AUX · Use the manual tuning method if the tuning search does not stop at the desired station because the signal is weak. 4 32 3 I Manual tuning If the signal from the station you want to select is weak, you must tune in to it manually. 1 Rotate INPUT (press TUNER on the remote control) to select TUNER as the input source. PHONO 1 2 Select TUNER and the reception band following steps 1 and 2 described in "Automatic tuning" on left. Press TUNING MODE (AUTO/MAN'L MONO) so that the "AUTO" indicator goes off from the front panel display. TUNING MODE or V-AUX TUNER MD/TAPE CD-R CD D-TV/LD CBL/SAT VCR 1 VCR2/DVR DVD INPUT Front panel Remote control AUTO AUTO/MAN'L MONO Goes off 2 Press FM/AM to select the reception band. "FM" or "AM" appears on the front panel display. FM/AM or If the colon (:) appears on the front panel display next to the band indication, press PRESET/TUNING (EDIT) to turn it off. PRESET /TUNING VCR 1 CBL/SAT D TV/LD DVD MD/TAPE CD R TUNER TUNED CD 3 Press TUNING MODE (AUTO/MAN'L MONO) so that the "AUTO" indicator lights up on the front panel display. TUNING MODE EDIT SP A A~~AM~1404 ~ 3 AUTO Lights up AUTO/MAN'L MONO Press PRESET/TUNING l / h to tune in to the desired station manually. [. . . ] and Canada models] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 120 V/60 Hz [Australia model] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 240 V/50 Hz [China model] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 220 V/50 Hz [General model] . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]