User manual YAMAHA RX-V2700

[. . . ] G RX-V2700 AV Receiver Ampli-tuner audio-vidéo OWNER'S MANUAL MODE D'EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING GEBRUIKSAANWIJZING CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this sound system in a well ventilated, cool, dry, clean place ­ away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit. [. . . ] · Select "Presence L" to adjust the tonal quality of the presence left speaker. · Select "Presence R" to adjust the tonal quality of the presence right speaker. · Select "Subwoofer" to adjust the tonal quality of the subwoofer. Press h to access the settings window. ADVANCED OPERATION Speaker Headphone MAX STD MIN 2 PARAM Test Tone RESET Speaker (Speaker dynamic range) Select to adjust the speaker compression. Headphone (Headphone dynamic range) Select to adjust the headphone compression. · Select "MAX" to preserve the greatest amount of dynamic range. · Select "STD" for general use. · Select "MIN" for listening to sources at low volume levels. EDIT EXIT Band / Gain Front L Front R Center 3 Press k / n / l / h to select "PARAM" and then press ENTER to select a parameter from "Band" (band), "Freq. " (frequency) or "Q" (Q factor). y You can adjust the gain with any parameter. English 89 En GRAPHIC USER INTERFACE (GUI) SCREEN 4 Press n to select "EDIT" and press ENTER to access the edit window. Band Gain Freq. Q #1 0. 0dB 125. 0Hz 1. 000 Control (Tone control) Choices: Speakers, Headphones Test Tone Front L Front R Center Control Bass Treble Speakers Headphones The parameter selected in "PARAM" is highlighted. · Press l / h to adjust the parameter. · Press k / n to adjust the "Gain". · Press ENTER to exit the edit window. y · When you select "Band" in step 3, you can use this menu as a graphic equalizer. · The "Band #1" and "Band #2" can adjust the frequencies below of 198. 4 Hz. · When you select "Subwoofer" in step 1 and "Band" in step 3, you can adjust "Band #1" and "Band #2" only. · For more information on the parametric equalizer, see page 89. · Select "Speakers" to adjust the bass/treble balance of your speakers. · Select "Headphones" to adjust the bass/treble balance of your headphones. y "Speaker" and "Headphone" adjustments are stored independently. The adjustments for "Speaker" affects the front left/right, center, presence left/right speaker channels and Subwoofer channel. 5 Repeat steps 3 and 4 until you are satisfied with the results. y If you want to reset all "Parametric EQ" parameter settings for the selected speaker, select "RESET" and press ENTER. Bass (Bass control) Use this feature to adjust low-frequencies output to your speakers or headphones. Choices: 125 Hz, 350 Hz, 500 Hz Control range: ­ 6. 0 dB to + 6. 0 dB Initial setting: 0. 0 dB Speaker Freq : 350Hz Gain : 0. 0dB +6 +0 -6 Control Bass Treble 6 Select "EXIT" and press ENTER to exit the settings window. Audio Bypass Tone Control (Tone control) Use this feature to adjust the balance of bass and treble output to your speakers or headphones. [. . . ] This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc. , 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Also add information on how to contact you by electronic and paper mail. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the library, if necessary. [. . . ]