User manual YAMAHA RX-V300K

[. . . ] R RXV300K Natural Sound AV Receiver Thank you for selecting this YAMAHA AV receiver. OWNER'S MANUAL SAFETY INSTRUCTIONS 7 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Wall or Ceiling Mounting ­ The unit should be mounted to a wall or ceiling only as recommended by the manufacturer. Ventilation ­ The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, the unit should not be situated on a bed, sofa, rug, or similar surface, that may block the ventilation openings; or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. Heat ­ The unit should be situated away from heat sources such as radiators, stoves, or other appliances that produce heat. 8 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] 14 9 TEST key Used for speaker balance adjustment. (For details, refer to page 17­18. ) English For Other Component Control Identify the remote control transmitter keys with your component's keys. If these keys are identical, their functions will be the same. On each key function, refer to the corresponding instruction on your component's manual. 2 CD player keys Controls compact disc player. * DISC is applicable only to compact disc changer. 1 Tape deck keys Controls tape deck. * DIR A, B and A/B are applicable only to double cassette tape deck. * For a single cassette deck with automatic reverse function, pressing DIR A will reverse the direction of tape running. Notes about the remote control transmitter Battery installation Remote control transmitter operation range 2 1 Remote control sensor 3 Within approximately 6 m (19. 7 feet) 30° 30° Battery replacement If you find that the remote control transmitter must be used closer to the main unit, the batteries are weak. Notes q Use only AA, R6, UM-3 batteries for replacement. (See the illustration inside the battery compartment. ) q Remove the batteries if the remote control transmitter will not be used for an extended period of time. q If batteries leak, dispose of them immediately. Avoid touching the leaked material or letting it come in contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries. Notes q There should be no large obstacles between the remote control transmitter and the main unit. q If the remote control sensor is directly illuminated by strong lighting (especially an inverter type of fluorescent lamp etc. ), it might cause the remote control transmitter not to work correctly. In this case, reposition the main unit to avoid direct lighting. 15 DISPLAY PANEL 1 23 4 56 PRESET ms STEREO 0 20 l00 SLEEP NORMAL WIDE PHANTOM MHz MEMORY AUTO kHz EFFECT OFF TAPE MON PRO LOGIC LIVE HOUSE VOCAL AID 3 STEREO HALL ONE TOUCH KARAOKE 7 8 9 0 A B 1 Multi-information display Displays various information, for example station frequency, preset station number and name of selected input source. 2 STEREO indicator Lights up when an FM stereo broadcast with sufficient signal strength is received. 8 AUTO indicator Lights up when this unit is in the automatic tuning mode. 9 TAPE MON indicator Lights up when the tape deck (or MD recorder etc. ) is selected as the input source by pressing the TAPE (MD) MONITOR button. 3 Signal-level meter Indicates the signal level of the received station. If multipath interference is detected, the indication decreases. 4 SLEEP indicator Lights up while the built-in SLEEP timer is functioning. 5 Center channel mode indicators The name of a selected center channel mode lights up only when the DSP program, PRO LOGIC or 3 STEREO is selected. 0 DSP program indicators When a normal DSP program ( PRO LOGIC, 3 STEREO, LIVE HOUSE or HALL) is selected, its name lights up. A ONE TOUCH KARAOKE indicator Lights up by pressing the ONE TOUCH KARAOKE button on the front panel. In this mode, you can select one of three audio output modes according as you prefer. If you select the "VOCAL CUT" mode, medium frequencies (vocals, etc. ) of the playing source sound are attenuated. To extinguish this indicator, press the ONE TOUCH KARAOKE button once or more. 6 EFFECT OFF indicator Lights up if the digital sound field processor including the Dolby Pro Logic Surround decoder is turned off by pressing the SUR/KARAOKE EFFECT button on the front panel or the EFFECT ON/OFF key on the remote control transmitter when a normal DSP program ( PRO LOGIC, 3 STEREO, LIVE HOUSE or HALL) is selected. In this state, sound output is 2-channel stereo. [. . . ] BALLAD, POPS, JAZZ, ROCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 to 50 msec. LIVE HOUSE, HALL . . . . . . . . . . . . . . 1 to 100 msec. PRO LOGIC . . . . . . . . . . . . . . . . . . . 15 to 30 msec. Gain Tracking Error (0 to ­60 dB) . . . . . . . . . . . . 3 dB Alternate Channel Selectivity [U. S. A. [. . . ]