User manual YAMAHA RX-V3800

[. . . ] G RX-V3800 AV Receiver Ampli-tuner audio-vidéo OWNER'S MANUAL MODE D'EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING GEBRUIKSAANWIJZING CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. Caution: read this before operating your unit. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this sound system in a well ventilated, cool, dry, clean place ­ away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit. [. . . ] For example, "Zone2 Initial Vol. " is set to ­20. 0 dB and then "Zone2 Max Vol. " is set to ­30. 0 dB, the volume level is automatically set to ­30. 0 dB when you turn on the power of this unit next time. INT:Both Notes · When "BI-AMP" is set to "ON" in "Advanced setup" (see page 122), you can only set "Zone2 Amplifier" or "Zone3 Amplifier" to "EXT". · When you set "Zone2 Amplifier" or "Zone3 Amplifier" to "INT:[SP1]" and the corresponding zone is turned on, no sound is output from the surround back speakers. · When you set "Zone2 Amplifier" or "Zone3 Amplifier" to "INT:[SP2]" in "ZONE 2" or "ZONE 3" and the corresponding zone is turned on, no sound is output from the surround speakers. Zone2 Initial Vol. /Zone3 Initial Vol. (Zone 2/Zone 3 Initial volume) Use this feature to set the volume level of Zone 2 or Zone 3 when the power of this unit is turned on. Choices: Off, Mute, ­80. 0 dB to +16. 5 dB Control step: 0. 5 dB Note The "Zone2 Max Vol. " or "Zone3 Max Vol. " setting takes priority over the "Zone2 Initial Vol. " or "Zone3 Initial Vol. " setting. 94 En Graphical user interface (GUI) screen Audio Select (Default audio input jack select) Use this feature to designate the default audio input jack select setting (see page 78) for the input sources connected to the DIGITAL INPUT jacks when you turn on the power of this unit. Choice Auto Functions Automatically detects the type of audio input signals and selects the appropriate audio input jack select setting. Automatically selects the last audio input jack select setting used for the connected input source. Memory Guard (Memory guard) Use this feature to prevent accidental changes to sound field program parameter values and other system settings. Choice Off On Functions Turns off the "Memory Guard" feature. Protects the following parameters ­ sound field program parameters ­ all GUI menu parameters ­ all speaker levels Last y When you select the protected parameter, " " appears at the bottom left of the GUI screen. You can adjust the parameters when you select the parameter and " " does not appear at the bottom left of the GUI screen even if "Memory Guard" is set to "On". Decoder Mode (Default decoder mode) Use this feature to designate the default decoder mode (see page 79) for the input sources when you turn on the power of this unit. Choice Auto Last Functions Automatically detects the type of input signals and select the appropriate decoder mode setting. Automatically selects the last decoder mode setting used for the connected input source. HDMI Set (S settings) Use this feature to adjust the HDMI support audio. Support Audio (Support audio) Use this feature to select whether to play back HDMI audio signals on this unit or on another HDMI component connected to the HDMI OUT jack on the rear panel of this unit. Choice RX-V3800 Functions Plays back HDMI audio signals on this unit. The HDMI audio signals input at the HDMI input jacks of this unit are not output to the HDMI component connected to the HDMI OUT jack on the rear panel of this unit. Plays back HDMI audio signals on another HDMI component connected to the HDMI OUT jack. EXTD Surround (Default Extended surround setting) Use this feature to designate the extended decoder mode (see page 85) for the input sources connected to the DIGITAL INPUT jacks when you turn on the power of this unit. Choice Auto Last ADVANCED OPERATION Other Functions Automatically detects the input digital audio signals and activates the appropriate decoder. Automatically selects the last decoder mode selected "EXTD Surround" in "Sound". Notes · This unit transmits audio and video signals input at the HDMI input jacks to HDMI OUT jack only when this unit is turned on even if "Support Audio" is set to "Other". · Available audio/video signals depend on the specification of the connected video monitor. Refer to the instruction manual of each connected component. English 95 En Graphical user interface (GUI) screen Signal Info. (Input signal information) You can display the format, sampling frequency, channel, bit rate and flag data of the current input signal. You can display the format, sampling frequency, channel, bit rate and flag data of the current input signal. Audio Info. (Audio information) Format Signal format. When this unit cannot detect a digital signal, it automatically switches to analog input. The number of samples per second taken from a continuous signal to make a discrete signal. The number of source channels in the input signal (front/surround/LFE). For example, a multi-channel soundtrack with 3 front channels, 2 surround channels and LFE, is displayed as "3/2/0. 1". [. . . ] You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the library, if necessary. Here is a sample; alter the names: Yoyodyne, Inc. , hereby disclaims all copyright interest in the library `Frob' (a library for tweaking knobs) written by James Random Hacker. <signature of Ty Coon>, 1 April 1990 Ty Coon, President of Vice That's all there is to it! 10. 11. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. [. . . ]