User manual YAMAHA RX-V461

[. . . ] G RX-V461 AV Receiver Ampli-tuner audio-vidéo OWNER'S MANUAL MODE D'EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING GEBRUIKSAANWIJZING CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. Caution: Read this before operating your unit. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this sound system in a well ventilated, cool, dry, clean place ­ away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit. [. . . ] · Press G l / h to change the parameter value. · Press G ENTER to enter the selected menu or to confirm the parameter. · Press H RETURN to return to the previous menu level. Press Q MENU to exit from "SET MENU". p p p p 5 p p 50 En SET MENU 1 SOUND MENU Use this menu to manually adjust any speaker settings or compensate for video signal processing delays. ;MANUAL SETUP 1 SOUND MENU . A)SPEAKER SET B)SP LEVEL C)SP DISTANCE D)CENTER GEQ E)LFE LEVEL [ ]/[ ]:Up/Down [ENTER]:Enter 1/2 ;MANUAL SETUP 1 SOUND MENU . F)D. RANGE G)AUDIO SET 2/2 Woofer section of a speaker is 16 cm (6. 5 in) or larger: large Woofer section of a speaker is smaller than 16 cm (6. 5 in): small Front speakers FRONT SP Choices: SMALL, LARGE 1 SOUND MENU [ ]/[ ]:Up/Down [ENTER]:Enter Speaker settings A)SPEAKER SET Use this feature to manually adjust any speaker settings. FRONT B speaker setting FRONT B Use this feature to select the location of the front speakers connected to the FRONT B terminals. Choices: FRONT, ZONE B 1 SOUND MENU A)SPEAKER SET FRONT B;;;;FRONT SMALL >LARGE · Select "FRONT" to turn on or off SPEAKERS A and B when the speakers connected to the FRONT B terminals are set in the main zone. · Select "ZONE B" if the speakers connected to the FRONT B terminals are set in another zone. If SPEAKERS A is turned off and SPEAKERS B is turned on, all the speakers including the subwoofer in the main zone are muted and this unit outputs sound at the FRONT B terminals only. Notes · If you connect headphones to the PHONES jack of this unit, the sound is output from both headphones and the FRONT B terminals when "FRONT B" is set to "ZONE B". · If a DSP program is selected when "FRONT B" is set to "ZONE B", this unit automatically enters the Virtual CINEMA DSP mode (see page 38). p p p p A)SPEAKER SET FRONT SP When the front speakers are large Select "LARGE" (large). When the front speakers are small Select "SMALL" (small). Note When "LFE/BASS OUT" is set to "FRONT" (see page 52), you can select only "LARGE" in "FRONT SP". If the value of "FRONT SP" is set to a setting other than "LARGE" in advance, this unit automatically changes the value to "LARGE". [ ]/[ ]:Up/Down [p]/[[]:Select p p ADVANCED OPERATION Center speaker CENTER SP Choices: NONE, SML, LRG 1 SOUND MENU A)SPEAKER SET CENTER SP NONE >SML LRG When the center speaker is large Select "LRG" (large). When the center speaker is small Select "SML" (small). When you do not use the center speaker Select "NONE" (none). The center channel signals are directed to the front left and right speakers. English 51 En SET MENU Surround left/right speakers Choices: NONE, SML, LRG SUR. L/R SP 1 SOUND MENU A)SPEAKER SET SUR. L/R SP Crossover CROSSOVER Use this feature to select a crossover frequency of all the speakers set to "SML" (or "SMALL") or to "NONE" in "SPEAKER SET" (see pages 50 and 51). All frequencies below the selected frequency will be sent to the subwoofer or to the speakers set to "LRG" (or "LARGE") in "SPEAKER SET" (see pages 50 and 51). Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 160Hz, 200Hz 1 SOUND MENU NONE >SML LRG When the surround speakers are large Select "LRG" (large). [. . . ] Please note that it is the customer's responsibility to ensure the product is adequately packaged when returning the product for repair. (3) Misuse, including but not limited to (a) failure to use the product for its normal purpose or in accordance with Yamaha's instructions on the proper use, maintenance and storage, and (b) installation or use of the product in a manner inconsistent with the technical or safety standards in force in the country where it is used. (4) Accidents, lightning, water, fire, improper ventilation, battery leakage or any cause beyond Yamaha's control. (5) Defects of the system into which this product is incorporated and/or incompatibility with third party products. [. . . ]