User manual YAMAHA RX-Z11

[. . . ] UCA AV Receiver OWNER'S MANUAL English Front panel A B C MAIN ZONE MASTER ON PURE DIRECT ON/OFF OFF INPUT SPEAKERS AUDIO SELECT A B STRAIGHT TUNING MODE MEMORY BAND PRESET/TUNING EDIT PROGRAM MENU VOLUME EFFECT DISPLAY MAN'L/AUTO ZONE CONTROLS SEARCH MODE REC OUT/ ZONE 2 ZONE ON/OFF TONE CONTROL MULTI ZONE ZONE 2 SILENT CINEMA ZONE 3 VIDEO ZONE 4 L AUDIO R OPTICAL PUSH ENTER YPAO S VIDEO HDMI IN USB PHONES OPTIMIZER MIC VIDEO AUX F D G HIJ K L M E N STRAIGHT SPEAKERS AUDIO SELECT A B TUNING MODE MEMORY BAND PRESET/TUNING EDIT PROGRAM MENU EFFECT DISPLAY MAN'L/AUTO ZONE CONTROLS SEARCH MODE REC OUT/ ZONE 2 ZONE ON/OFF TONE CONTROL MULTI ZONE ZONE 2 SILENT CINEMA ZONE 3 VIDEO ZONE 4 L AUDIO R OPTICAL PUSH ENTER YPAO S VIDEO HDMI IN USB PHONES OPTIMIZER MIC VIDEO AUX O P Q (U. S. A. and Canada models) 2 En Remote control 1 D 2 POWER TV POWER AV STANDBY POWER E MULTI BD HD DVD CBL SAT TUNER V-AUX PHONO MD TAPE CD-R DVD CD 3 Backlight mode The remote control is equipped with the motion sensor and the remote control lights up the backlight corresponding to the motions or operation. If you do not want to lights up the backlight when this unit detects motions, change the backlight mode (see page 124). Simplified remote control This products is supplied with the simplified remote control. [. . . ] recommends that "Bass Out" to "SWFR". LFE signals output Subwoofers and speakers Choice Subwoofers Front & SWFR SWFR Front Output Surround R Surround Back L Surround Back R Front Presence L Front speakers No output Other speakers No output Output No output No output Output No output No output Front Presence R Rear Presence L Rear Presence R Subwoofer L Subwoofer R Low-frequency signals output Subwoofers and speakers Choice Subwoofers Front & SWFR SWFR Front *1 *2 Front speakers *3 Other speakers Advanced Operation y If your subwoofer can adjust the output volume and the crossover frequency, set the volume to about half way (or slightly less) and set the crossover frequency to the maximum. *4 No output *3 *1 *3 *3 Notes · The available speaker channels differ depending on the setting of the speakers. · If you are only using one surround back speaker, connect it to the SUR. BACK SINGLE jack, and adjust the distance in "Surround Back L". *1 Output(s) the low-frequency signals of the front channels and other speakers set to "Small". *2 Always output the low-frequency signals of the front channels. *3 Output the low-frequency signals if the speakers are set to "Large". *4 Outputs the low-frequency signals of the speakers set to "Small" or "None". Unit (Unit) Selects the unit for displaying the values of "Speaker Distance" parameter. and Canada models) Meter (Other models) Choice Meter (m) Feet (ft) Functions Adjusts speaker distances in meters. Adjusts speaker distances in feet. 101 En Graphical user interface (GUI) menu Speaker Level (Speaker level) Use this feature to manually balance the speaker levels between the front left or surround left speakers and each speaker selected in "Speaker Set" (see page 99). Control range: ­10. 0 dB to +10. 0 dB Initial setting: 0. 0 dB Control step: 0. 5 dB Speaker Level Front L Front R Center Surround L Surround R Surround Back L Surround Back R Front Presence L Front Presence R Rear Presence L Rear Presence R Subwoofer L Subwoofer R Adjusted speaker Front left speaker Front right speaker Center speaker Manual Setup (Volume) Use this menu to manually adjust the various volume settings. Adaptive DRC (Adaptive dynamic range control) Use this feature to adjust the dynamic range in conjunction with the volume level. This feature is useful when you are listening at lower volumes or at night. When "Adaptive DRC" is set to "Auto", this unit controls the dynamic range as follows: ­ If the VOLUME setting is low: the dynamic range is narrow ­ If the VOLUME setting is high: the dynamic range is wide Output level Output level Surround left speaker Surround right speaker Surround back left speaker Surround back right speaker Front presence left speaker Front presence right speaker Rear presence left speaker Rear presence right speaker Subwoofer left Subwoofer right AUTO OFF AUTO OFF Input level Input level VOLUME: low VOLUME: high Choice Auto Off Functions Adjusts the dynamic range automatically. Does not adjust the dynamic range automatically. y · You can also adjust the dynamic range of the bitstream signal sources by using "Dynamic Range" in "Sound" (see page 103). · This function is also useful for listening with your headphones. y · If your subwoofer can adjust the output volume and the crossover frequency, set the volume to about half way (or slightly less) and set the crossover frequency to the maximum. · If you use a handheld sound pressure level meter, hold at arm's length and point upwards so that the meter is in the listening position. With the meter set to the 70 dB scale and to C SLOW, calibrate each speaker to 75 dB. Notes · The adaptive dynamic range control feature does not function when this unit is in the THX Surround modes (see page 87) or Pure Direct mode (see page 65). · If you set "Direct" in "2ch Stereo" to "Auto" (see page 94) and this unit is in the 2ch Stereo mode, the adaptive dynamic range control feature does not function in some cases. Notes · The available speaker channels differ depending on the setting of the speakers. · If you are only using one surround back speaker, connect it to the SUR. BACK SINGLE jack, and adjust the balance in "Surround Back L". · The setting of "Speaker Level" changes depending on the setting of "PEQ Select" in "Manual Setup" (see page 104). Adaptive DSP Lvl (Adaptive DSP effect level) Use this feature to make fine adjustments of the DSP effect level (see page 91) automatically in conjunction with the volume level. Choice Auto Off Functions Adjusts the DSP effect level in conjunction with the volume level. Does not adjust the DSP effect level automatically. Note Even if you set "Adaptive DSP Lvl" to "Auto", this unit does not change but fine-tunes the specified value of "DSP Level" (see page 91). Max Volume (Maximum volume) Use this feature to set the maximum volume level in the main zone. This feature is useful to avoid the unexpected loud sound by mistake. For example, the original volume range is ­80. 0 dB to +16. 5 dB. [. . . ] 110 Zone 3 settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 Zone 4 balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 Zone 4 initial volume setting . . . . . . . . . . . . . . . . . . . . . . . . . 109 Zone 4 Maximum volume setting . . . . . . . . . . . . . . . . . . [. . . ]