User manual YAMAHA RX-730

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual YAMAHA RX-730. We hope that this YAMAHA RX-730 user guide will be useful to you.

Lastmanuals help download the user guide YAMAHA RX-730.


Mode d'emploi YAMAHA RX-730
Download

You may also download the following manuals related to this product:

   YAMAHA RX-730 (2146 ko)

Manual abstract: user guide YAMAHA RX-730

Detailed instructions for use are in the User's Guide.

[. . . ] 3 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds. 4 Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in an environment with high humidity (i. e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury. 5 Avoid installing this unit where foreign objects may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. [. . . ] In this case, the controls of this unit will not function except the PHONES jack and the SPEAKERS A/B buttons. Use the controls on the external control amplifier to make volume adjustments, etc. Right If you use two sets (A and B), the impedance of each speaker must be 12 or higher. If you use one set (A or B), the impedance of each speaker must be 4 or higher. Left If you use two sets (A and B), the impedance of each speaker must be 8 or higher. Notes · The Canada model cannot use two separate speaker sets (A and B) simultaneously when the IMPEDANCE SELECTOR switch is slid to the 6 position. · If this unit fails to turn on, the IMPEDANCE SELECTOR switch may not be fully slid to either position. If this is the case, slide the switch all the way to either position when the power supply to this unit is completely cut off. English 15 CONNECTIONS Turning on and off this unit When all connections are complete, turn on the power of this unit. 1 Press MASTER ON/OFF on the front panel inward to the ON position to turn on the power of this unit. Main Zone of this unit turns on. MASTER 1 ZONE 2 ON/OFF FM/AM l TUNING h PURE DIRECT ZONE CONTROL EDIT MEMORY TUNING MODE CD DIRECT AMP MAN'L/AUTO FM AUTO/MAN'L ON OFF MASTER SPEAKERS A B 16 A/B/C/D/E 1 2 3 4 5 6 7 8 VOLUME 20 12 26 ON OFF 8 INPUT MAIN ZONE PHONES REC OUT SOURCE MD/TAPE VCR CD TUNER PHONO 3 4 ­5 2 1 BASS 0 1 2 3 4 5+ 3 4 2 TREBLE 1 0 1 2 3 4 ­5 5+ 3 4 2 BALANCE 1 0 1 2 3 4 L5 5R 3 4 2 LOUDNESS 1 FLAT ­30dB 10 9 8 5 6 7 40 4 ON/OFF DTV/CBL DVD 60 2 0 -dB You can set Main Zone of this unit to the standby mode by pressing MAIN ZONE ON/OFF on the front panel or STANDBY on the remote control. Press MAIN ZONE ON/OFF on the front panel or POWER on the remote control to turn Main Zone of this unit on again. Press MASTER ON/OFF on the front panel again to release it outward to the OFF position to turn off this unit. y While MASTER ON/OFF on the front panel is pressed inward to the ON position, you can turn on Zone 2 or set it to the standby mode independently (see page 35). 16 PLAYING AND RECORDING PLAYING AND RECORDING CAUTION Extreme caution should be exercised when you play back CDs encoded in DTS. If you play back a CD encoded in DTS on a DTS-incompatible CD player, you will only hear some unwanted noise that may damage your speakers. The MUTE indicator disappears from the front panel display. MUTE 22 FM/AM TUNING FM/AM TUNING There are 2 tuning methods; automatic and manual. Select either method according to your preference and the strength of station signals. Automatic tuning Automatic tuning is effective when station signals are strong and there is no interference. 4 Press TUNING l / h once to begin automatic tuning. Press h to tune into a higher frequency. Press l to tune into a lower frequency. l TUNING h 243 ZONE 2 ON/OFF FM/AM l TUNING h PURE DIRECT ZONE CONTROL EDIT MEMORY TUNING MODE CD DIRECT AMP MAN'L/AUTO FM AUTO/MAN'L Notes 16 VOLUME MASTER SPEAKERS A B A/B/C/D/E 1 2 3 4 5 6 7 8 20 12 26 ON OFF 8 INPUT MAIN ZONE PHONES REC OUT SOURCE MD/TAPE VCR CD TUNER PHONO 3 4 ­5 2 1 BASS 0 1 2 3 4 5+ 3 4 2 TREBLE 1 0 1 2 3 4 ­5 5+ 3 4 2 BALANCE 1 0 1 2 3 4 L5 5R 3 4 2 LOUDNESS 1 FLAT ­30dB 10 9 8 5 6 7 40 4 ON/OFF DTV/CBL DVD 60 2 0 -dB 1 1 Rotate the INPUT selector (or press TUNER on the remote control) to select TUNER as the input source. INPUT · When you tune into a station, the frequency of the received station is shown in the front panel display. · To search for another station, press TUNING l / h once more. · If the tuning search does not stop at the desired station because the station signals are weak, try using the manual tuning method. BASIC OPERATION TUNER or Front panel Remote control 2 Press FM/AM on the front panel to select the reception band (FM or AM). FM or AM appears in the front panel display. FM/AM 3 Press TUNING MODE on the front panel so that the AUTO indicator lights up in the front panel display. TUNING MODE AUTO/MAN'L AUTO Lights up English 23 FM/AM TUNING Manual tuning Manual tuning is effective when station signals are weak. 4 Press TUNING l / h to manually tune into the desired station. Hold down the button to continue tuning search. l TUNING h 243 ZONE 2 ON/OFF FM/AM l TUNING h PURE DIRECT ZONE CONTROL EDIT MEMORY TUNING MODE CD DIRECT AMP MAN'L/AUTO FM AUTO/MAN'L 16 MASTER SPEAKERS A B A/B/C/D/E 1 2 3 4 5 6 7 8 VOLUME 20 12 Notes 8 4 2 26 ON OFF INPUT MAIN ZONE PHONES REC OUT SOURCE MD/TAPE VCR CD TUNER PHONO 3 4 ­5 2 1 BASS 0 1 2 3 4 5+ 3 4 2 TREBLE 1 0 1 2 3 4 ­5 5+ 3 4 2 BALANCE 1 0 1 2 3 4 L5 5R 3 4 2 LOUDNESS 1 FLAT ­30dB 10 9 8 5 6 7 40 ON/OFF DTV/CBL DVD 60 0 -dB · When you tune into a station, the frequency of the received station is shown in the front panel display. · If you tune into an FM station, it is automatically received in the monaural mode to increase signal quality. 1 1 Rotate the INPUT selector (or press TUNER on the remote control) to select TUNER as the input source. INPUT TUNER or Front panel Remote control 2 Press FM/AM on the front panel to select the reception band (FM or AM). FM or AM appears in the front panel display. FM/AM 3 Press TUNING MODE on the front panel so that the AUTO indicator disappears from the front panel display. TUNING MODE AUTO/MAN'L AUTO Disappears 24 FM/AM TUNING Automatic preset tuning You can use the automatic preset tuning method to automatically store FM stations. This function enables this unit to automatically tune into FM stations with strong signals and store up to 40 (8 stations in each of the 5 groups, A1 to E8) of those received stations in order. [. . . ] 45 dB · Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Hz to 15 kHz, +0. 5/­2 dB AM SECTION · Tuning Range [U. S. A. and Canada models] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530 to 1710 kHz [Asia and General models] . . . . . . . . . . . . . . . . . [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE YAMAHA RX-730

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual YAMAHA RX-730 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag