User manual YAMAHA S250X

[. . . ] 4 Deleting Songs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Rearranging the Song Order (Song Sort) . . . . . . . . 6 Changing the Counter Display . . . . . . . . . . . . . . . . . . . . . . . . . 7 Registering a Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] "_" indicates disks that are not included in the group. · You can set playback to start from any disk in the group that contain songs. 10 In the above display, "A" is selected. Therefore, playback begins from disk A and continues to the end of disk F, then stops. Disks are played back from left to right in the display. The chain will not repeat unless the "All Repeat" setting is made (see Chapter 7 "Repeat Playback" in the Basic Operation Manual for details). Disks represented by "x" and "_" are skipped. Canceling Group Functions You can choose to manage your disks in disk units instead of group units by setting Memory Disk Chain Play to OFF and selecting a target disk in the Memory Disk selection display. For example, if you want to play disk 7 only, you should set Memory Disk Chain Play to OFF, and select disk 7 using the [SELECT] buttons. English 3 Press [PLAY/PAUSE] to begin Chain Play from the specified disk. Chapter 2: Chain Play -- Playing Back Memory Disks in a Group 1 You can also press [ENTER] or [STOP] to engage Standby mode. When playback of the last song on the selected disk finishes, the next disk in the group that contains songs is automatically played back. Hold down [FUNC. ] and press [STANDBY / ON]. The setup menu appears. 2 Press [>] to move the c cursor to the Chain Play option, then press [ENTER]. A display similar to the following appears. 3 Press [­/NO] or [+/YES] until OFF appears. 4 Press [ENTER]. The group is switched off, and the display returns to the setup menu. 11 5 With the cursor at the End option, press [ENTER] to restart the Control Unit. This is the same as turning off the Control Unit and then turning it back on. The standard disk title display appears. The disk title display shows [- - - -] to indicate that no group is selected. 12 Chapter 3 Timer Play English You can program your Disklavier to play back groups of disks at various specified times. All you need to do is register up to a maximum of 99 timer settings, and your Disklavier will perform them unattended. The "Timer Play Examples" section provides some examples of programmed playback. Important: The Control Unit must be turned on in advance in order for Timer Play to function. Timer Play cannot turn on/off the Control Unit. to 11:00 p. m. , with interruptions for live performances at 7:00 p. m. At 7:30 p. m. , playback of Grp1 picks up where it last left off. It stops again at 9:00 p. m. , and at 9:30 p. m. , it starts playback again from where it left off. Only one group is registered, but since it contains many disks, and is set to RND playback, it will last through the evening. 6:00 8:00 10:00 12:00 14:00 16:00 18:00 20:00 22:00 The Disklavier above is set to play at 7:00 a. m. , 12:00 p. m. and 5:00 p. m. , and set to stop at 9:00 p. m. At each of the specified time, it plays a group of songs until all the disks in the group are played back. The Disklavier will stop playing at 9:00 p. m. even if Grp3 is still playing. 15 Example 3 Location: store 07:55 08:00 10:00 12:00 13:00 15:00 17:00 17:15 Turn on Control Unit (manually) Opening (1 song) 01:[08:00 > PLAY > Grp1] Time (1 song) 02:[10:00 > PLAY > Grp2] Lunch (continuous) 03:[12:00 > PLAY > Grp3] Lunch end 04:[13:00 > STOP] Time (1 song) 05:[15:00 > PLAY > Grp2] Closing (3 songs) 06:[17:00 > PLAY > Grp4] Turn off (manually) Memory Disk 1: 1 song for opening of store . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Grp1 Memory Disk 2: 1 song to be played on the hour . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Grp2 Memory Disk 3: several songs for continuous play during lunch . . . . . . . . . . . . Grp3 Memory Disk 4: continuation of disk 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The second part is saved under a new song number. The first part is kept under the previous song number. The first part is kept under the previous song number. Chapter 6: Recording L/R Songs NEW 1 Specify a disk. Note: If you are recording to a floppy disk, make sure that the disk's erasure protection tab is set to "unprotected. " CANCEL 2 6 Press [REC] to engage the Record Standby mode. The REC indicator lights and the PLAY/PAUSE indicator flashes. A new song number is created for the new recording. [. . . ]