User manual YAMAHA STAGEPAS 400I

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual YAMAHA STAGEPAS 400I. We hope that this YAMAHA STAGEPAS 400I user guide will be useful to you.

Lastmanuals help download the user guide YAMAHA STAGEPAS 400I.


Mode d'emploi YAMAHA STAGEPAS 400I
Download
Manual abstract: user guide YAMAHA STAGEPAS 400I

Detailed instructions for use are in the User's Guide.

[. . . ] ZC57930 EN PORTABLE PA SYSTEM Connecting microphones, instruments, and audio devices to the mixer Applying Reverb The STAGEPAS 400i features a built-in reverb processor that is in the same league as our famed SPX effect processor series. This reverb lets you simulate the acoustics of different performance environments, such as concert halls and small clubs, and add warm, natural ambience to your vocals or instrument performance. 5 MONITOR OUT jacks These are for connection to a powered speaker for monitoring purposes, and output a mix of the signals from channels 1 to 7/8. You can adjust the output level using the MONITOR OUT control (!). If only the L (MONO) jack is used, the signals from the L and R channels are mixed and output. 9 USB connector Connect your iPod/iPhone using a USB cable to play music and charge the iPod/iPhone. [. . . ] 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. No sound is heard. …… you connect the mixer’s SPEAKERS Did jacks and the speakers’ input jacks using the proper speaker cables?…… you firmly and securely connect the Did speaker cables?…… a speaker other than the included Is speaker (MODEL 400S) connected to the mixer’s SPEAKERS jacks?Please connect the included speaker (MODEL 400S). …… you use the included speaker Did cables?If you use a commercially-available speaker cable with a metal-housing connector, the cable will be shorted when the connector touches other metal, resulting in no sound being produced. …… the POWER LED flashing at intervals?Is There may be a short in the speaker cable or the connection may be faulty. Check that the speaker cable is not scratched and is connected properly to the mixer, then reapply the power. …… channels 5/6, are both phone and For RCA-pin jacks connected at the same time?Or, for channels 7/8, are both phone and stereo mini jacks connected at the same time?The phone jack has priority for channels 5/6 and the stereo mini jack has priority for 7/8. …… the POWER LED flashing Is continuously?If the internal power amplifier section is excessively overloaded, the amplifier will be muted for protection. The mixer will automatically reset itself after a while. Phantom Voltage +30 V (CH1, 2) Speaker Unit LF: 8” (20 cm) Cone HF: 1” (2. 54 cm) Compression Driver If you notice any abnormality • When one of the following problems occur, immediately turn off the power switch and disconnect the electric plug from the outlet. Then have the device inspected by Yamaha service personnel. - The power cord or plug becomes frayed or damaged. - Some object has been dropped into the instrument. - There is a sudden loss of sound during use of the device. • If this mixer should be dropped or damaged, immediately turn off the power switch, disconnect the electric plug from the outlet, and have the device inspected by qualified Yamaha service personnel. Connections • Before connecting the device to other devices, turn off the power for all devices. [. . . ] If this occurs, move the cell phone further away from the speaker system. • Air blowing out of the bass reflex ports is normal, and often occurs when the speaker is handling program material with heavy bass content. • Always turn the power off when the device is not in use. For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Dimensions Mixer 116 „„ Connectors • XLR-type connectors are wired as follows (IEC60268 standard): pin 1: ground, pin 2: hot (+), and pin 3: cold (-). Speaker Unit: mm Information „„ About functions/data bundled with the device • iPod TM , iPhone TM iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc. , registered in the U. S. and other countries. 1 2 Attach the speaker to the speaker stand with the lock lever moved up (release position). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE YAMAHA STAGEPAS 400I

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual YAMAHA STAGEPAS 400I will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag