User manual YAMAHA SY85

[. . . ] YAMAHA SY85 Music Synthesizer Owner's Manual 2 - Feature Reference - GENERAL EDITING PROCEDURE PERFORMANCE EDIT MODE VOICE EDIT MODE DRUM VOICE EDIT MODE SONG EDIT MODE PATTERN EDIT MODE UTILITY MODE WAVE EDIT MODE APPENDIX CONTENTS GENERAL EDITING PROCEDURE s s s s Mode Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Selecting Specific Edit Functions . . . . . . . . . . . . . . . 8 Selecting & Editing Parameters. . . . . . . . . . . . . . . . 10 Controller Assignment Display . . . . . . . . . . . . . . . . . . [. . . ] Use the data entry dial to step through the events on the selected track. The displays and parameters corresponding to the various event types are described below. When the event to be changed is located, use the appropriate slider to change it as required (or move the cursor to the desired parameter by pressing the corresponding function key and then use the [-] and [+] keys). The selected event can be erased by pressing the [F8] key ("Top of Track", "Measure Bar", and "End of Track" can not be deleted). After changing a value the [ENTER/YES] key must be pressed to actually enter the new value. When done, press the [EXIT/NO] key to return to the song mode menu. q Top of the Track, Measure Dividers, & End of Track `````Meas`Beat`Clock`==`Top`of`Track`==`` `CHG``001`-`01`-`24````````````````````` `````Meas`Beat`Clock`==`Measure`Bar`==`` `CHG``001`-`01`-`24````````````````````` `````Meas`Beat`Clock`==`End`of`Track`==`` `CHG``001`-`01`-`24````````````````````` These displays indicated the beginning of the track, measure lines, and the end of the track, respectively. Since they are not actually musical events, they can not be edited. 158 SONG EDIT MODE / TRACK EDIT q Notes `````Meas`Beat`Clock`C#3```(>`)`mf``````` `CHG``001`-`01`-`24```61`0018```64`ERASE F1 F2 F3 F4 F5 F6 F7 F8 CS1 CS2 CS3 CS4 CS5 CS6 CS7 CS8 Note events appear with three parameters: · The note itself, edited by [CS5]. The note name appears on the upper display line while the corresponding MIDI note number appears on then lower line. In addition to using [CS5] or the [-1] and [+1] keys, note events can be change by pressing the desired key on the keyboard while holding the [SHIFT] key. The gate time of the note, edited by [CS6]. The note length is shown graphically on the upper display line while the corresponding length in clocks is shown on the lower line. The velocity of the note, edited by [CS7]. The velocity is displayed in approximate musical dynamic markings on the upper display line, while the corresponding MIDI velocity value is shown on the lower line. · · q Control Change `````Meas`Beat`Clock``=`Control`Change`= `CHG``001`-`01`-`24````1````2``````ERASE F1 F2 F3 F4 F5 F6 F7 F8 CS1 CS2 CS3 CS4 CS5 CS6 CS7 CS8 Control change events appear with 2 parameters: · · The control number, edited by [CS5]. This specifies what controller was used (modulation wheel, foot controller, etc. ). This specifies the actual controller setting, and therefore how the sound is modified. SONG EDIT MODE / TRACK EDIT 159 q Program Change `````Meas`Beat`Clock``=`Program`Change`= `CHG``001`-`01`-`24```````001``````ERASE F1 F2 F3 F4 F5 F6 F7 F8 CS1 CS2 CS3 CS4 CS5 CS6 CS7 CS8 Program change events have a single parameter: the program change number itself, edited via [CS6]. Program change numbers normally specify a voice change. q Pitch Bend `````Meas`Beat`Clock``=`Pitch`Bend`=```` `CHG``001`-`01`-`24```````+07``````ERASE F1 F2 F3 F4 F5 F6 F7 F8 CS1 CS2 CS3 CS4 CS5 CS6 CS7 CS8 Pitch change events appear with a single parameter: the new pitch bend value, edited via [CS6]. +63. q Aftertouch `````Meas`Beat`Clock``=`After`Touch`=``` `CHG``001`-`01`-`24`````````7``````ERASE F1 F2 F3 F4 F5 F6 F7 F8 CS1 CS2 CS3 CS4 CS5 CS6 CS7 CS8 Aftertouch events appear with a single parameter: the new aftertouch value, edited via [CS6]. The effect of aftertouch events depends on how aftertouch control is assigned in the voice edit mode. 160 SONG EDIT MODE / TRACK EDIT q The Meas, Beat, and Clock Parameters These three parameters are common to all the displays described above. In addition to indicating the location of the current event, they can be edited to move the event as required: · The "Meas" parameter, edited via [CS2], indicates the number of the current measure. The length of each measure depends on the time signature of the song. The "Beat" parameter, edited via [CS3], indicates the current beat within the current measure. The value of each beat and the number of beats in each measure depend on the selected time signature. [. . . ] Tel: 686-00-33 KOREA Cosmos Corporation #131-31, Neung-Dong, Sungdong-Ku, Seoul Korea Tel: 02-466-0021~5 PORTUGAL Valentim de Carvalho CI SA Estrada de Porto Salvo, Paço de Arcos 2780 Oeiras, Portugal Tel: 01-443-3398/4030/1823 MALAYSIA Yamaha Music Malaysia, Sdn. , Bhd. 16-28, Jalan SS 2/72, Petaling Jaya, Selangor, Malaysia Tel: 3-717-8977 BRASIL Yamaha Musical Do Brasil LTDA. Reboucas 2636, São Paulo, Brasil Tel: 55-11 853-1377 GREECE Philippe Nakas S. A. Navarinou Street 13, P. Code 10680, Athens, Greece Tel: 01-364-7111 PANAMA Yamaha De Panama S. A. [. . . ]