User manual YAMAHA TX-950

[. . . ] Several panning effects that automatically shift the sound position (left, right, front, back). Simulates a cylindrical space expanding to left and right. A hypothetical acoustic space which extends without limit. A bit of initial delay followed by reverb with a unique resonance. [. . . ] Two delayed sounds (L and R), and independent feedback delays for L and R. The feedback of the two delayed sounds is crossed. This effect isolates only the early reflection components of the reverb. Description Chorus effect without modulation, created by adding a slightly pitch-shifted sound. Distortion which simulates the sound of a vintage tube, fuzz effect, etc. Distortion which simulates the sound of a vintage tube, fuzz effect, etc. Since a Compressor is included in the first stage, steady distortion can be produced regardless of changes in input level. Changes the center frequency of a wah filter according to the input level. ) Changes the center frequency of a wah filter according to "Pedal Control" parameter. Holds down the output level when a specified input level is exceeded. A sense of attack can also be added to the sound. About Mic/Vocal Harmony column: The relevant parameters are received by the song part designated by the Effect's Harmony Channel Parameter or Melody Channel Parameter. O (Available for extra parts of a song) X O (Available for extra parts of a song) O (Available for extra parts of a song) O (Available for extra parts of a song) O (Available for extra parts of a song) [MIDI] Address (H) Size (H) Data (H) Parameter Description Voice Regular/Drum/ Mic/ Song Natural/Organ Vocal Voice Harmony *The MULTI O O EQ Parameter O O cannot be reset to its O O factory O O setting with XG SYSTEM O O ON. About PLAY column: Not available when Function Utility Parameter Lock is checked. *The EFFECT 2 Parameter cannot be reset to its factory setting with XG SYSTEM ON. TOTAL SIZE 14 : Transmitted via panel operations The second byte of the address is considered as an Insertion effect number n: insertion effect number TX-950 CVP-503 CVP-505 CVP-509 n = 0~2 n = 0~2 n = 0~2 n = 0~5 For effect types that do not require MSB, the Parameters for Address 02-0B will be received and the Parameters for Address 30-42 will not be received. For effect types that require MSB, the Parameters for Address 30-42 will be received and the Parameters for Address 02-0B will not be received. When bulk dumps that include Effect Type data are transmitted, the parameters for addresses 02-0B will always be transmitted. For effects that require MSB however, when a bulk dump is received, the parameters for addresses 02-0B will not be received. TX-950 CVP-503 CVP-505 CVP-509 Address (H) Size (H) O O O [MIDI] Data (H) Parameter Description Voice Regular/Drum/ Mic/ Song Natural/Organ Vocal Voice Harmony *The SPECIAL EFFECT Parameter cannot be reset to its factory setting with XG SYSTEM ON MIDI Reception Right1/ Keyboard Style Right2/ Left MIDI Transmission Extra Right1/ Right2/ Left Style Song Upper Lower [Sound Creator] PLAY PLAY REW REC From panel (Right1/ Right2/Left) [MIDI] Address (H) Size (H) Data (H) Parameter Description Voice Regular/Drum/ Mic/ Song Natural/Organ Vocal Voice Harmony part 10, 26=0, other parts=2 part 10=7F, O X O other parts=00 00 O X O 00 O X O Part No. TOTAL SIZE 06 : Transmitted via panel operations nn = PART NUMBER If there is a Drum Voice assigned to the part, the following parameters are ineffective. TX-950 CVP-503 CVP-505 CVP-509 Address (H) Size (H) X O O O [MIDI] Data (H) Parameter Description Voice Regular/Drum/ Mic/ Song Natural/Organ Vocal Voice Harmony *The A/D X X PART X X parameter cannot be X X reset to its X X factory setting with X O XG System On. [. . . ] [MIDI] Address (H) Size (H) Data (H) Parameter Description XG Default (H) Voice MIDI Reception Regular/Drum/ Mic/ Song Right1/ Keyboard Style Extra Natural/Organ Vocal Right2/ Voice Harmony Left O X O (Drum only) (Available only for song parts) O X O (Drum only) (Available only for song parts) O X O (Drum only) (Available only for song parts) O X O (Drum only) (Available only for song parts) O X O (Drum only) (Available only for song parts) O X O (Drum only) (Available only for song parts) O X O (Drum only) (Available only for song parts) O X O (Drum only) (Available only for song parts) O X O (Drum only) (Available only for song parts) O X O (Drum only) (Available only for song parts) O X O (Drum only) (Available only for song parts) O X O (Drum only) (Available only for song parts) X O O (Available only for song parts) (Drum only) O X O (Drum only) (Available only for song parts) O X O (Drum only) (Available only for song parts) X O O (Available only for song parts) (Drum only) MIDI Transmission Right1/ Style Song Upper Right2/ Lower Left O O O O O O O O O O O O O O O O [Song Creator] PLAY PLAY REW REC From panel (Right1/ Right2/Left) X X X X X X X X X X X X X X X X TOTAL SIZE 0E n: Drum Setup Number (0-1) rr: note number (0D-5B) In the following cases, the instrument will initialize all Drum Setups. XG SYSTEM ON received GM SYSTEM ON received GM LEVEL2 SYSTEM ON received GS RESET received DRUM SETUP RESET received (only when in XG mode) [Note] When a part to which a Drum Setup is assigned receives a program change, the assigned Drum Setup will be initialized. If the same Drum Setup is assigned to two or more parts, changes in Drum Setup parameters (including program changes) will apply to all parts to which it is assigned. X = ignored 04 = Sub-ID #1 = Device Control Message 05 = Sub-ID #2 = Global Parameter Control 01 = Slot path length = 1 01 = Parameter ID width = 1 01 = Value width = 1 01 = Slot path MSB = 1 01 = Slot path LSB = 1 (Reverb) PP = Parameter to be controlled. [. . . ]