User manual YAMAHA TYROS3

[. . . ] Owner's Manual EN SPECIAL MESSAGE SECTION PRODUCT SAFETY MARKINGS: Yamaha electronic products may have either labels similar to the graphics shown below or molded/stamped facsimiles of these graphics on the enclosure. The explanation of these graphics appears on this page. Please observe all cautions indicated on this page and those indicated in the safety instruction section. ENVIRONMENTAL ISSUES: Yamaha strives to produce products that are both user safe and environmentally friendly. [. . . ] The registered panel setups can be recalled by simply pressing the desired number button. NOTE The panel setups registered in the numbered buttons are preserved even when you turn off the power. If you want to delete all the eight current panel setups, turn the [POWER] button on while holding the B5 key (right-most B key on the keyboard). Saving the Registration Memory as a Bank file You can save all the eight registered panel setups as a single Registration Memory Bank file. Bank 04 Bank 03 Bank 02 Bank 01 1 6 Press the REGIST BANK [+] and [-] buttons simultaneously to call up the Registration Bank Selection Display. Registration Memory ­ Saving and Recalling Custom Panel Setups ­ 2 2 Press the [6 ] (SAVE) button to save the Bank file (page 30). Tyros3 Owner's Manual · 69 Recalling a Registered Panel Setup The saved Registration Memory Bank files can be recalled by using the REGIST BANK [-]/[+] buttons or the following procedure. 1 2 3 Press the REGIST BANK [+] and [-] buttons simultaneously to call up the REGISTRATION BANK Selection Display. Press one of the [A]­[J] buttons to select a Bank. Press one of the green-lit numbered buttons ([1]­[8]) in the Registration Memory section. NOTE Turning the [FREEZE] button on disables recall of specific item(s). To use this function, you need to select the item(s) not to be recalled by accessing [FUNCTION] [E] REGIST SEQUENCE/FREEZE/VOICE SET TAB [Q][W] FREEZE. Confirming the Registration Memory Information You can call up the information display to take a look which Voices and Style are memorized to the [1]­[8] buttons of a Registration Memory Bank. 1 Simultaneously press the REGIST BANK [+] and [-] buttons to call up the Registration Bank Selection display, then use the [A]­[J] buttons to select the desired Bank. You can also use the [DATA ENTRY] dial and the [ENTER] button to select a Bank. Press the [6 ] (INFO) button to call up the information display. NOTE You can instantly call up the information display of the currently selected Registration Memory Bank by pressing the [DIRECT ACCESS] button and one of the REGISTRATION MEMORY [1]­[8] buttons in sequence. 6 Registration Memory ­ Saving and Recalling Custom Panel Setups ­ 2 3 2 By using the TAB [Q][W] buttons, you can switch between the two information display pages: information for the Registration Memory [1]­[4] buttons and information for the [5]­[8] buttons. NOTE The grayed Voice indicates that the corresponding Voice part is off, while black indicates the part is on. 3 Press the [F] (CLOSE) button to close the information display. Refer to the Reference Manual on the website. [FUNCTION] [E] REGIST SEQUENCE/FREEZE/VOICE SET TAB [Q][W] FREEZE [FUNCTION] [E] REGIST SEQUENCE/FREEZE/VOICE SET TAB [Q][W] REGISTRATION SEQUENCE Advanced Features Disabling recall of specific items: Calling up Registration Memory numbers in order: 70 · Tyros3 Owner's Manual Recording Audio with the Hard Disk Recorder Here you'll learn how to record your performance as audio data to an installed hard disk drive. For example, by connecting a guitar, microphone or other device to the instrument, you can record an ensemble performance of guitar and keyboard together or record yourself singing along with Song playback. The Hard Disk Recorder function gives you two tracks to work with: Main and Sub. By effective use of the Bounce Recording feature, you can mix down previous takes and record many more than just two tracks, one by one. The performance data is saved as a WAV file of conventional CD quality (44. 1 kHz/16 bit). You can also export the recorded data to a USB storage device, then play and even edit the recorded performance on computer. · Internal sound of the Tyros3 (Keyboard parts (Right 1, Right 2, Right 3, Left), Multi Pad, Song parts, Style parts) · Input from a microphone, guitar or other instrument (via the [LINE IN/MIC] jack). · Input from another audio device, such as a CD player, digital audio player or the like (via the [LINE IN/MIC] jack). Recording Your Performance This section explains how to record your performance to the Hard Disk Recorder. For example, you can first record your keyboard performance to the Main track, then record your voice (vocal) to the Sub track by the procedure described below. You can record a maximum of 80 minutes to one audio song. 1 7 Recording Audio with the Hard Disk Recorder Set the desired Voice, Style, etc. which you want to use for your performance. For instructions on selecting a Voice, see page 36. For instructions on selecting a Style and using auto accompaniment, see page 48. IMPORTANT For recording, your hard disk drive should have at least 50 MB. Make sure there is enough available space on the hard disk: [FUNCTION] [I] UTILITY TAB [Q][W] MEDIA [F] PROPERTY. 2 Press the HARD DISK RECORDER [SETTING] button to call up the Audio Setting display. By playing the keyboard, you can check the signal on the REC MONITOR meter. Tyros3 Owner's Manual · 71 3 Press the HARD DISK RECORDER [REC] and [STOP] buttons simultaneously. [. . . ] 09300, México, D. F. , México Tel: 55-5804-0600 SPAIN/PORTUGAL Yamaha Música Ibérica, S. A. 17, 200, 28230 Las Rozas (Madrid), Spain Tel: 91-639-8888 INDONESIA PT. Yamaha Music Indonesia (Distributor) PT. Nusantik Gedung Yamaha Music Center, Jalan Jend. [. . . ]