User manual YAMAHA UB2108-W-

[. . . ] U BRACKET EN PRECAUTIONS CAUTION PLEASE READ CAREFULLY BEFORE PROCEEDING * Please keep this manual in a safe place for future reference. UB2108(W) Owner's Manual Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the device or other property. These precautions include, but are not limited to, the following: Thank you for choosing this Yamaha product. [. . . ] For optimum safety, the installation should be checked thoroughly at regular intervals. Yamaha cannot be held responsible for damage or injury caused by insufficient strength of the support structure or improper installation. Installation Instructions 1. Remove the speaker's center side screws. Snap on the cover plate to the base of the U-bracket. * Illustrations herein are for explanatory purposes only, and may not match actual appearance during operation. * Company names and product names herein are trademarks or registered trademarks of their respective companies. * Specifications and descriptions in this owner's manual are for information purposes only. reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer. Package Contents UB2108(W) U-mount bracket (1 pc. ) M10-40mm button head socket screws (2 pcs. ) Friction gaskets, 1/8" thick (2 pcs. ) Split lock washers, M10 (2 pcs. ) Snap-on Cover plate Flat Washer, M10 (2 pcs. ) Wrench, hex L-key, M10 (1 pc. ) Snap-on cover plate (1 pc. ) 2. Place the U-bracket over the speaker cabinet and confirm that you have ordered the correct bracket. Temporarily insert the sound isolation gaskets between the arms of the bracket and the speaker. Position the speaker in between the bracket arms with the sound isolation gaskets. Secure the speaker to the bracket using the included hardware through the desired slots into the speaker enclosure's threaded mounting holes. Dimensions 18. 115 9. 057 . 500 3X . 375 2X 2. 500 . 402 8X . 250 3. [. . . ] Rotate the speaker to the desired direction then fully secure the side bolts. CAUTION Secure the speaker to the mounting structure with a properly rated safety cable. 17. 875 9. 880 10. 000 8. 500 1. 402 . 402 X 1. 402 SLOT 4X R1. 500 [. . . ]