User manual YAMAHA VENTURE

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual YAMAHA VENTURE. We hope that this YAMAHA VENTURE user guide will be useful to you.

Lastmanuals help download the user guide YAMAHA VENTURE.

Download

Manual abstract: user guide YAMAHA VENTURE

Detailed instructions for use are in the User's Guide.

 [. . . ] OWNER'S MANUAL

PZ50RTX PZ50GTX PZ50MTX PZ50VTX

LIT-12628-02-68

8GK-28199-11

ESU10040

Introduction
ESU10120

Congratulations on your purchase of a Yamaha snowmobile. This model is the result of Yamaha's vast experience in the production of fine sporting and touring snowmobiles. It represents the high degree of craftsmanship and reliability that have made Yamaha a leader in these fields. This manual will give you an understanding of the operation,  inspection,  and basic maintenance of this snowmobile.  [. . . ] G Replace the brake hose every four years,  or if cracked or damaged. 

44

Periodic maintenance
ESU13000 ESU11761

Tool kit
The owner's tool kit has the tools which are sufficient for most periodic maintenance and minor repairs. A torque wrench is also necessary to properly tighten nuts and bolts. 

Removing and installing the shroud and covers
Shroud,  front cover,  and air filter case cover
To open the shroud and remove the front cover and air filter case cover 1. Unhook the latch,  and then slide the front cover upward (PZ50RT / PZ50GT / PZ50MT). Unhook the shroud latches,  and then slowly raise the shroud forward until it stops (PZ50VT). Loosen the fasteners,  lift up the air filter case cover slightly,  and then unhook the cover from the air filter case to remove it. Tool kit
ECS00780

CAUTION:
Before starting the engine,  make sure that the tool kit is securely fastened(PZ50RT / PZ50GT / PZ50MT) and that the storage pouch zipper is completely closed. 

NOTE:
If you do not have a torque wrench available during a service operation requiring one,  take your snowmobile to a Yamaha dealer to check the torque settings and adjust them if necessary. 
1. Latch Front cover Air filter case cover Fastener

PZ50VT

1. Shroud

45

Periodic maintenance
PZ50RT / PZ50GT / PZ50MT

1. Projection on the air filter case cover

To close the shroud and install the front cover and air filter case cover 1. Insert the projections on the end of the air filter case cover into the slots in the air filter case,  place it in the original position,  and then tighten the fasteners. 

Slowly lower the shroud to the original position,  and then hook the shroud latches (PZ50VT). 

Left side cover
To remove the left side cover Loosen the fasteners,  and then remove the left side cover. 

1. Projection on the end of the air filter case cover 2. Slot in the air filter case

2. 

Fit the holders on the front cover over the projections on the air filter case cover,  slide the front cover downward,  and then hook the latch onto the holder on the front of the snowmobile (PZ50RT / PZ50GT / PZ50MT). 

1. Left side cover

To install the left side cover Place the left side cover in the original position,  and then tighten the fasteners. 

Right side cover
To remove the right side cover Loosen the quick fastener screws,  and then remove the right side cover. 

46

Periodic maintenance
2. Remove the right upper cover by removing the bolts. 

1. Quick fastener screw

To install the right side cover Place the right side cover in the original position,  and then tighten the quick fastener screws. 

1. Right upper cover

Top cover (PZ50RT / PZ50GT / PZ50MT)
To remove the top cover Pull up on the rear of the top cover. 

To install the right upper cover 1. Place the right upper cover in the original position,  and then install and tighten the bolts to the specified torque. Right upper cover bolt tightening torque: 8 Nm (0. 8 m·kgf,  5. 8 ft·lb) 2. Install the top cover. 

Left and right upper covers (PZ50VT)
To remove an upper cover 1. Loosen the fasteners,  and then remove the upper cover. 
1. Top cover

To install the top cover Insert the projections on the front of the top cover into the slots in the left and right upper covers,  and then fit the projections on the rear of the top cover into the grommets. 

Right upper cover (PZ50RT / PZ50GT / PZ50MT)
To remove the right upper cover 1. Right upper cover

47

Periodic maintenance
To install an upper cover 1.  [. . . ] 26 Ski spring preload,  adjusting . . . . . . . . . . . . . . . . . . . . 24 Skis and ski runners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Spark plugs,  checking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE YAMAHA VENTURE

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual YAMAHA VENTURE will begin.