User manual YAMAHA VMAX 500 DELUXE-1999

[. . . ] È. ) 2 The engine number is stamped in the location as shown. Ê. ) Also, record and keep the ID numbers in a separate place in case the snowmobile is stolen. E_8gg. book Page 1 Thursday, March 16, 2006 4:23 PM ESU00011 2- INTRODUCTION Congratulations on your purchase of a Yamaha snowmobile. This model is the result of Yamaha's vast experience in the production of fine sporting and touring snowmobiles. It represents the high degree of craftsmanship and reliability that have made Yamaha a leader in these fields. [. . . ] G Do not use the strap to lift the snowmobile. G Do not use the strap as a mounting point for cargo or accessories. @ 7-8 E_8gg. book Page 9 Thursday, March 16, 2006 4:23 PM ESU03471 Driving WARNING @ Be sure to read the "SAFETY INFORMATION" and "Riding your snowmobile" sections carefully before operating the snowmobile. @ NOTE: @ Make sure that the engine is warmed up enough before riding. @ For RS90N/RS90M/RS90MS 1. Release the parking brake by moving the parking brake lever to the right. Press the throttle lever slowly to move the snowmobile. Turn the handlebar in the desired direction. Squeeze the brake lever to stop the snowmobile. Apply the parking brake by moving the parking brake lever to the left. For RS90R/RS90NR/RS90GT/RSG90/RSG90GT 1. To select the desired operating position, pull the shift lever out, slide it to "FWD" or to "REV" until it stops, and then release it. 1 2 3 4 Pull out Slide to "FWD" (Forward) Slide to "REV" (Reverse) Release WARNING @ G G G G @ Make sure that the throttle lever is fully released and the snowmobile is at a full stop before shifting. Be sure to slide the shift lever to "FWD" or "REV" until it stops completely and only while the engine is idling. Maintenance, replacement, or repair of devices and systems related to emissions control may be performed by any repair establishment or individual that is certified (if applicable). WARNING @ If you are not familiar with maintenance work, have a Yamaha dealer do it for you. @ PROPER PERIODIC MAINTENANCE OF YOUR SNOWMOBILE IS IMPORTANT IN ORDER TO ENJOY LONG, PLEASURABLE SERVICE. ESPECIALLY IMPORTANT ARE THE MAINTENANCE SERVICES RELATED TO EMISSIONS CONTROL. THESE SERVICES NOT ONLY ENSURE CLEANER AIR, BUT ARE ALSO VITAL TO PROPER ENGINE OPERATION AND MAXIMUM PERFORMANCE. IN THE FOLLOWING PERIODIC MAINTENANCE CHARTS, THE SERVICES RELATED TO EMISSIONS CONTROL ARE GROUPED SEPARATELY. THESE SERVICES REQUIRE SPECIALIZED DATA, KNOWLEDGE, AND EQUIPMENT. YAMAHA DEALERS ARE TRAINED AND EQUIPPED TO PERFORM THESE PARTICULAR SERVICES. ESU04970 Periodic maintenance chart for the emission control system CD-31E Item Remarks Preoperation check (Daily) Initial 1 month or 800 km (500 mi) (40 hr) Every Seasonally or 4, 000 km (2, 500 mi) (200 hr) G Page Spark plugs Check condition. Replace if necessary. 8-5­8-6 Valve clearance Crankcase breather system Fuel filter Check clearance. Adjust clearance when engine Every 40, 000 km (25, 000 mi) is cold. Check breather hose for cracks or damage. G G 8-8 It is recommended that these items be serviced by a Yamaha dealer. 8-1 E_8gg. book Page 2 Thursday, March 16, 2006 4:23 PM Item Remarks Preoperation check (Daily) Initial 1 month or 800 km (500 mi) (40 hr) Every Seasonally or 4, 000 km (2, 500 mi) (200 hr) G Page Fuel line Idle speed Check fuel hose for cracks or damage. G G 8-7 Carburetors Whenever operating condition (elevation/temperature) is changed. [. . . ] An alternate method is to remove the carburetor silencer and squirt oil into the carburetor throats while the engine is running. CAUTION: @ Do not attempt to store the snowmobile by simply starting the engine occasionally during the storage period. Moisture and acids form during combustion which can actually increase the chance for corrosion damage during the storage period. @ 5. Surface protection Apply a coat of wax to painted surfaces. Apply suitable protectants to the exterior of the engine, drive track, and to other metal, plastic, and rubber parts. [. . . ]