User manual YAMAHA XV125S-2000

[. . . ] OWNER'S MANUAL XV125S 5AJ-28199-E3 INTRODUCTION EAU00001 Welcome to the Yamaha world of motorcycling!As the owner of a XV125S, you are benefiting from Yamaha's vast experience in and newest technology for the design and the manufacture of high-quality products, which have earned Yamaha a reputation for dependability. Please take the time to read this manual thoroughly, so as to enjoy all your XV125S's advantages. The owner's manual does not only instruct you in how to operate, inspect and maintain your motorcycle, but also in how to safeguard yourself and others from trouble and injury. [. . . ] This adjustment however, should be left to a professional Yamaha service technician. Turn the adjusting nut in direction a to increase free play and in direction b to decrease free play. Tighten the locknut. Throttle cable free play adjustment NOTE: Before checking the throttle cable free play, the engine idling speed should be adjusted. Adjust the throttle cable by turning the adjusting nut so that specified free play at the throttle grip is obtained. 5 6 7 8 9 6-16 PERIODIC MAINTENANCE AND MINOR REPAIR EAU00647 Tires 1 2 3 4 5 6 7 8 9 To ensure maximum performance, long service, and safe operation, note the following: Tire air pressure Always check and adjust the tire pressure before operating the motorcycle. Maximum load* Cold tire pressure Up to 90 kg Front 183 kg Rear 175 kPa 200 kPa (1. 75 kg/cm2, (2. 0 kg/cm2, 1. 75 bar) 2. 00 bar) 200 kPa 225 kPa (2. 0 kg/cm2, (2. 25 kg/cm2, 2. 00 bar) 2. 25 bar) w EW000083 90 kg load ~ Maximum load* * Load is the total weight of cargo, rider, passenger, and accessories. w EW000082 Tire inflation pressure should be checked and adjusted when the temperature of the tire equals the ambient air temperature. Tire inflation pressure must be adjusted according to total weight of cargo, rider, passenger, and accessories (fairing, saddlebags, etc. if approved for this model), and vehicle speed. Proper loading of your motorcycle is important for several characteristics of your motorcycle, such as handling, braking, performance and safety. Do not carry loosely packed items that can shift. Securely pack your heaviest items close to the center of the motorcycle, and distribute the weight evenly from side to side. Properly adjust the suspension for your load, and check the condition and pressure of your tires. Make sure the total weight of the cargo, rider, passenger, and accessories (fairing, saddlebags, etc. if approved for this model) does not exceed the maximum load of the motorcycle. Operation of an overloaded motorcycle could cause tire damage, an accident, or even injury. 6-17 PERIODIC MAINTENANCE AND MINOR REPAIR FRONT a Manufacturer CHENG SHIN REAR Size 3. 00-18 47P Type C-916 w EAU00681 1 Manufacturer CHENG SHIN Size 130/90-15M/C 66P Type C-915 Minimum tire tread depth (front and rear) 1. 6 mm 1. Tread depth Tire inspection Always check the tires before operating the motorcycle. If center tread depth reaches the limit as shown, if the tire has a nail or glass fragments in it, or if the side wall is cracked, contact a Yamaha dealer immediately and have the tire replaced. NOTE: These limits may be different by regulation from country to country. If so, conform to the limits specified by the regulations of your own country. 8 Operating the motorcycle with excessively worn tires decrease riding stability and can lead to loss of control. Have excessively worn tires replaced by a Yamaha dealer immediately. Brakes, tires, and related wheel parts replacement should be left to a Yamaha Service Technician. 8 Patching a punctured tube is not recommended. If it is absolutely necessary to do so, use great care and replace the tube as soon as possible with a good quality replacement. 1 2 3 4 5 6 7 8 9 6-18 PERIODIC MAINTENANCE AND MINOR REPAIR EAU00685 Wheels 1 2 3 4 5 6 7 8 9 To ensure maximum performance, long service, and safe operation, note the following: 8 Always inspect the wheels before a ride. Check for cracks, bends or warpage of the wheel. Be sure the spokes are tight and undamaged. If any abnormal condition exists in a wheel, consult a Yamaha dealer. [. . . ] Remove the spark plug caps from the spark plugs, install the spark plugs and then the spark plug caps. w EWA00003 When turning the engine over, be sure to ground the spark plug electrodes to prevent damage or injury from sparking. Lubricate all control cables and the pivoting points of all levers and pedals as well as of the sidestand/centerstand. MOTORCYCLE CARE AND STORAGE 7. Check and, if necessary, correct the tire air pressure, then raise the motorcycle so that both of its wheels are off the ground. Alternatively, turn the wheels a little every month in order to prevent the tires from becoming degraded in one spot. [. . . ]