User manual YAMAHA YSP-1000

[. . . ] G YSP-1000 Digital Sound Projector Système Acoustique Numérique OWNER'S MANUAL MODE D'EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING CAUTION: READ THIS BEFORE OPERATING THIS UNIT. 1 2 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install this sound system in a well ventilated, cool, dry, clean place with at least 5 cm of space above (or below) this unit ­ away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds. [. . . ] This mode is ideal if you do not want the sound beams to be reflected on the walls in your listening room or if you do not disturb others asleep while enjoying music or movies at night. Press TARGET on the remote control to select the target mode and then press the angle. Control range: L90° to R90° / to adjust · Press repeatedly to increase the horizontal angle on the left side. · Press repeatedly to increase the horizontal angle on the right side. TARGET 5 In addition, you can adjust the horizontal angle of the sound beams so that you can hear dialogues clearly even from a distant location such as the kitchen area in your listening room. ENTER VOL BASIC OPERATION Notes · The sound beams are not rebounded off the walls in your listening room. · If the target mode is selected as the beam mode, the surround modes (see page 46), the CINEMA DSP programs (see page 51) and the TruBass (see page 58) become ineffective. In addition, no audio is output from the subwoofer connected to this unit. English 45 ENJOYING SURROUND SOUND ENJOYING SURROUND SOUND Decoder indicators Depending on the input source and the selected surround mode, the indicators in the front panel display light up as follows: Status When PCM signals are being input When DTS digital signals are being input or when DTS Neo:6 is selected When Dolby Digital signals are being input When Dolby Pro Logic is selected When Dolby Pro Logic II is selected y · You can select an input mode (AUTO, DTS or ANALOG) by pressing INPUTMODE on the remote control repeatedly (see page 86). · Discs encoded in DTS-ES or Dolby Digital 5. 1 EX will be played back in DTS or Dolby Digital. Surround modes and recommended sources Surround mode Dolby Pro Logic Dolby Pro Logic II ­ Movie Music Game Cinema Music Recommended source All sources Movies Music Games Movies Music Indicator PCM DTS Neo:6 Notes DIGITAL PL PL · Surround modes are available when the beam mode is set to a setting other than the stereo or the target mode. · When you select an input source (see page 39), the surround mode used for the previously selected input source is selected. · If the power of this unit is turned off and on again, the surround mode used for the previously selected input source before the power was turned off is selected. · The surround modes are available only when the CINEMA DSP programs are turned off (see page 55) or when the movie program is selected as the CINEMA DSP program (see page 54). · Only Dolby Pro Logic, Dolby Pro Logic II Movie and DTS Neo:6 Cinema are available when the movie program is selected as the CINEMA DSP program (see page 54). · If the surround modes are not available, "Prohibit" appears in the front panel display when you press SURROUND on the remote control. · The surround modes are available only when 2-channel signals are being input. If you try to switch between the surround modes when 5. 1 channel signals are being input, "Prohibit" appears in the front panel display. 46 ENJOYING SURROUND SOUND Enjoying 2-channel sources in surround sound This unit can decode 2-channel sources for 5. 1 channel playback so that you can enjoy a variety of surround sound effects by switching the surround mode. y The surround modes are available only when the CINEMA DSP programs are turned off (see page 55) or when the movie program is selected as the CINEMA DSP program (see page 54). In addition, the beam mode must be set to the 5 beam mode, the stereo plus 3 beam mode or the 3 beam mode (see page 42). 2 Press SURROUND on the remote control repeatedly (or press SURROUND and then press / ) to switch between surround modes. SURROUND or SURROUND ENTER INPUTMODE SLEEP YSP 5BEAM ST+3BEAM 3BEAM 1 STEREO 2 TARGET 3 6 VOL MODE 4 MUSIC 5 MOVIE 7 SPORTS 8 OFF 9 SURROUND 0 CH LEVEL +10 CINEMA DSP MENU PRO LOGIC PLI Movie I ENTER TEST RETURN PLI Music I PLI Game I BASIC OPERATION 1 Press YSP on the remote control to switch to the operation mode of this unit. YSP Neo:6 Cinema Neo:6 Music Example of the surround mode display in the front panel display when the CINEMA DSP program is turned off English 47 ENJOYING SURROUND SOUND Enjoying TV in surround sound You can enjoy analog audio signals output from your TV in real surround sound. y Before performing the steps below, set the volume of this unit to ­40 dB. If necessary, adjust the volume level in step 4 below. 4 Press VOLUME +/­ on the remote control to adjust the volume level. VOLUME DVD VCR INPUT1 STB TV INPUT2 TV MACRO AUX INPUTMODE SLEEP YSP 5BEAM ST+3BEAM 3BEAM 5 1 STEREO 2 TARGET 3 6 VOL MODE 4 MUSIC 5 MOVIE 7 SPORTS 8 OFF 9 SURROUND 0 CH LEVEL +10 CINEMA DSP MENU Press SURROUND repeatedly (or press SURROUND and then press / ) on the remote control to select a surround mode. Signals input from 2-channel sources are played back on multiple channels. For more information on surround modes, see page 46. SURROUND ENTER TEST RETURN or VOLUME CH TV VOL SURROUND ENTER 1 Select the TV channel you want to watch. To select a TV channel, use the remote control supplied with your TV. This unit outputs audio signals from your TV. TV 2 3 If you hear sound from your TV speakers, reduce the volume level of your TV until you can no longer hear any audio being output. To reduce the TV volume level, use the remote control supplied with your TV. 48 ENJOYING SURROUND SOUND Adjusting surround mode parameters You can configure the parameters for Dolby Pro Logic II Music and DTS Neo:6 Music to fine-tune the surround sound effect. INPUTMODE SLEEP SURROUND or SURROUND ENTER YSP 5BEAM ST+3BEAM 3BEAM 1 STEREO 2 TARGET 3 6 VOL MODE 4 MUSIC 5 MOVIE 7 SPORTS 8 OFF 9 SURROUND 0 CH LEVEL +10 CINEMA DSP MENU PRO LOGIC PLI Movie I ENTER TEST RETURN PLI Music I PLI Game I 1 Press YSP on the remote control to switch to the operation mode of this unit. YSP Neo:6 Cinema Neo:6 Music BASIC OPERATION Example of the surround mode display in the front panel display when the CINEMA DSP program is turned off 2 Press SURROUND on the remote control repeatedly (or press SURROUND and then press / ) to select PL II Music or Neo:6 Music. 3 Press / to select the parameter. ENTER 4 Press / to configure the parameter. ENTER English 49 ENJOYING SURROUND SOUND When Dolby Pro Logic II Music is selected PANORAMA Gives front left and right channel sound a wraparound effect, distributed throughout the entire surround sound field to give you an expansive feeling. [. . . ] 56 96 SPECIFICATIONS SPECIFICATIONS AMP SECTION · Maximum Output Power (EIAJ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 W (1 kHz, 10% THD, 4 ) × 40 20 W (100 Hz, 10% THD, 3 ) × 2 GENERAL · Power supply [U. S. A. and Canada models] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 120 V, 60 Hz [Australia model] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . and Europe models] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]