User manual YASHICA ZOOMATE 165SE

[. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: h Reorient or relocate the receiving antenna. [. . . ] Select the slideshow icon , and press the SET button. STILL Only still images are played IMAGE: back in the slideshow. VIDEO Only video clips are played CLIP: back in the slideshow. MIX: Still images and video clips are played back in the slideshow. Return to the Playback Setting Screen. SLIDESHOW STILL IMAGE VIDEO CLIP MIX EXIT EXIT: <When STILL IMAGE or MIX is selected> 1 Select "TIME" or "EFFECT", press the SET button. 2 Press [n] or [o] on the arrow button to select the desired setting. 3 Press the SET button. 3 Select "START", and press the SET button. h Slideshow playback is canceled when the SET button, MENU button or an arrow button is pressed. SLIDESHOW TIME EFFECT START EXIT 4SEC OFF English 66 OTHER PLAYBACK FUNCTIONS Image protect mode (Prevent accidental erasure) By using the image protect mode, you can prevent accidental erasure or overwriting of the important data that you want to keep. 1 2 3 4 Display the data that you want to protect. Display the Playback Setting Screen (see page 61). Select the protect icon . Press the SET button. h If the protect mode has already been enabled for the data, then "UNLOCK?" appears. PROTECT LOCK?h Press the [n] or [o] arrow button to select the copy source. INT MEM m CARD: Image data is copied from the internal memory to the card. INT MEM l CARD: Image data is copied from the card to the internal memory. COPY IMAGE CHOOSE COPY DIRECTION INT MEM INT MEM EXIT CARD CARD h If a card is not inserted in the camera, you cannot select the copy image icon . 71 English 4 Press the SET button. h The screen appears for you to select whether to copy only the image currently shown or to copy all the images from the card or the internal memory. Press the [n] or [o] arrow button to make your selection. COPY IMAGE COPY SINGLE COPY ALL EXIT 5 Press the SET button. To proceed with copying, select "YES" and press the SET button. h To copy other data, press [l] or [m] to display the data that you want to copy and press the SET button. h If you wish to cancel the copy procedure and return to the Copy Image Screen, press the MENU button, or select "EXIT" and press the SET button. English 72 OTHER PLAYBACK FUNCTIONS Extracting a Still Image From a Video Clip You can select one image (scene) from a video clip, copy it, and save it as a still image (the original data remains unchanged). 1 2 3 Play back a video clip, and pause at the point you wish to copy and save (see pages 56 and 57). Display the Playback Setting Screen (see page 61). Select the extract still icon , and press the SET button. h The screen to extract an image appears. [. . . ] <Using the manual focus effectively> i When photographing a moving subject, press the shutter release button just before the subject reaches the focus distance, and the shutter will be released when the subject is at the correct distance. i Use manual focus to avoid incorrectly focussed images when there is an object between the camera and the subject you wish to focus on. English 136 HINTS FOR TAKING PICTURES Shooting portraits (portrait mode >) Points: i Choose a background that doesn't detract from your subject. i Pay attention to lighting and how it affects your subject. NOTE i If the background is distracting, it will not show your subject to his best advantage. [. . . ]