User manual YOO DIGITAL CLEARY VYOO

[. . . ] eNGLISH I M PORTA N T : s a fe t y a dv ic e 1. Before connecting the kettle to the power supply, check that the voltage indicated on the appliance (underside the kettle & base) corresponds with the voltage in your home. If this is not the case, contact your dealer and do not use the kettle. The attached base can not be used for other than intended use. [. . . ] Always ensure the lid is closed and do not lift it while the water is boiling. Scalding may occur if the lid is removed during the brewing cycles. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. Do not use the appliance for other than intended use. The kettle can only use with the stand provided. If the kettle is overfilled, boiling water may be ejected. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. This appliance is intended to be used in household and similar applications such as: – staff kitchen areas in shops, offices and other working environments; – farm houses; – by clients in hotels, motels and other residential type environments; – bed and breakfast type environments. As s e m b ly/ D i s a s s e m bl y Know your kettle ______________________________________________ 
 Before initial use ______________________________________________ If you are using the kettle for the first time, it is recommended that you clean your kettle before use by boiling a full kettle of water twice and then discarding the water. eNGLISH H ow t o u s e operation _____________________________________________________ 1. To fill water into the kettle, remove it from the power base and open the lid by pressing the lid open button , fill with the desired amount of water to the kettle. Always fill the kettle between the minimum (0. Too little water will result in the kettle switching off before the water has boiled. WARNING Do not fill the water over the maximum level, as water may spill out of the spout when boiling. Ensure that the lid is firmly in place before connecting the power cord to the outlet. Press the switch button below the handle. The indicating lights inside the kettle will light up. The kettle will switch off automatically once the water has boiled and the light extinguishes. You can shut off the power by pressing the switch button at any moment during boiling water. WARNING Ensure that switch is clear of obstructions and the lid is firmly closed. The kettle will not turn off if the switch is constrained or if the lid is left open. [. . . ] Any stains remaining inside the spout can be removed by rubbing with a damp cloth, fill the kettle with clean water, bring to boil and then discard the water. Repeat and the kettle will then be ready to use. The outside of the kettle can be wiped over with a damp cloth. Cleaning appearance of housing _______________________________ Wipe the appearance of housing with a wild and damp cloth or cleaner, never use a poisonous cleaner. [. . . ]