User manual YOO DIGITAL COOKYOO 1800

[. . . ] ENGLISH IM P O RTA N T : s a fe t y a dv ic e When using this electrical appliance, basic safety precautions should always be followed, including the following: 1. Before using check that the voltage indicated on the product corresponds with the voltage of your electrical outlet. Do not operate any appliance with a damaged cord or plug or after the appliance malfunction or has been damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair or adjustment. [. . . ] Once all pieces have been cleaned and dry thoroughly, reassemble. Place the blade assembly into the jar assembly (See Fig. Put the jar base onto the blade assembly, holding the jar handle, thread the jar base into the bottom of the jar assembly and turn it counterclockwise until tight. Place the cap into the lid and lock in the direction as shown in Fig. Finally, place the assembled jar onto the motor unit and turn it clockwise until tight. Do not try to twist jar onto motor unit This unit comes with a Liquid Crystal Display (LCD) screen that shows the total operation time of 2 minutes (120s) for each speed setting selected. To use: Place the food to be blended into the jar and put the lid on the jar before blending. When crushing ice or hard food, keep one hand on the lid. Note : The mixture in the jar never exceed the max capacity of jar (1200ml) 1. Plug in the unit, press the key POWER, a beep sound is heard, the LCD comes on and displays “00”. (See “CONTROL PANEL”) The indicator of POWER key blinks and other indicators of three keys are illuminated. And the default function is MIX, namely the indicator of MIX is lighting. Press the key FUNCTION consecutively to select the speed setting you want. mIX(1) , CHOP(2) , BLENDER(3) , LIQUIFY(4) , PUREE(5)or ICE CRUSH. The light of selected setting is illuminated on the control panel and the LCD displays the total operation time of 2 minutes for each setting. Press the key START/CANCEL to start the unit and the START/CANCEL key begins blinking. The POWER key stops blinking and becomes illuminated, the LCD will count down. Note : During operation, you can press and hold PULSE button at any time to achieve the highest speed. Once the time has run, namely the operation has completed, beeps will be heard, the appliance will stop automatically, namely the POWER key turns to blink, and the START/CANCEL key stops blinking and becomes illuminated. Note : during operation, if desired effect has obtained, you can press the START/CANCEL key to stop operating. The POWER key will blink and the START/CANCEL key stops blinking and becomes illuminated. After use, Press the POWER key to disconnect the unit from the mains supply. [. . . ] Brush the blade clean using warm soapy water, then rinse thoroughly under the tap. Leave to dry upside down away from children. Wipe the motor unit with a damp cloth and dry thoroughly. Remove the stubborn spots by rubbing with a damp cloth and non-abrasive cleaner. [. . . ]