User manual YORKVILLE LP-LED4

[. . . ] Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall, causing serious personal injury and serious damage to the product. Use only with cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product. [. . . ] The unit should be serviced only by qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Each light fixture contains 4 very high-power multi-die LED emitters. Each of the emitters has a red, green, blue and white die. With the addition of the white die, a more complete light spectrum is available, objects and people illuminated appear with a more accurate color. The light output of each fixture is roughly equivalent to 300 watt bulbs with gels. The beam has a diameter of 2 feet, at a distance of 6 feet. The diameter is 4 feet at a distance of 12 feet. The light is mixed in the lens so that the mixed light color is visible when looking at the lens. Audio Effects 4-band Sound to Light (slow) 3-band Sound to Light (fast) Flash ALL with Bass Beat, (Mixed color changes with each beat) Flash Color Pairs with Bass Beat Audio Chase (1-step per Bass Beat) (Color changes with each beat) Color Changes with Each Step 6 steps per second 2 steps per second 10 seconds per step All Pods are the same color 5 seconds per fade 15 seconds per fade 90 seconds per fade The LP-LED4 may be used in several ways: Linked to other LP-LED4s with one as master 4. controlled by DMX signals through the add-on (sold separately) DMX module. The Yorkville Sound LP-C12 controller allows for more functionality than the LP-LED4 has on is own. The older Yorkville Sound LP-608 may also be used but has limited functionality (see more detailed description below). When a Yorkville Sound Color Controller is used, the controls on the LP-LED4 become inactive. When the LP-LED4 is operated by itself (stand alone) there are a number of modes which are determined by the FUNCTION control: OFF Dimming (4 levels) Chase (3 speeds) Color fade (3 speeds) Audio effects (5) When used in the dimming mode, the color of each fixture is determined by the corresponding COLOR control. Any fixture can be turned off by setting the COLOR control to the off position. [. . . ] Line voltage can be anywhere from 100 to 240 volts AC. NOTE: A lock washer MUST be used on each bolt!Unlimited Warranty Yorkville's two and ten-year unlimited warranty on this product is transferable and does not require registration with Yorkville Sound or your dealer. [. . . ]