User manual ZANKER ZKM3064KX

[. . . ] The decorative pattern on the ceramic surface can become scratched and marred with use, depending upon how one uses and maintains the unit, but does not adversely affect performance. Note: The warranty does not cover such blemishes. Sincerely ZANKER DESIGN 2 Operating instructions Switch symbols (to the left) Switch for regulating the small plate at the rear Switch for regulating the large plate at the front. [. . . ] These can be removed with the cleaning agent supplied with the unit. Cleaning of the ceramic surface The ceramic surface must be cleaned each time that the unit has been in use. Use a clean cloth, which has been dipped in warm, soapy water 6 (use liqud AJAX or other diswashing liquid), and well wrung. All spills must be cleaned up immediately, while the burner is still warm. Use the cleaning agent supplied with the unit. Remove spots caused by utensils with aluminium bottoms, or burned grease, by polishing with the cleaning agent supplied with the unit. In extreme cases polishing may have to be repeated several times in order to remove the blemish entirely. After clean-up of any of the burners, the entire ceramic surface should be polished, using the cleaning agent supplied with the unit. Cleaning of borders and edges All borders and edges, including the front control panel, should be cleaned in the same manner, and with the same cleaning agent for example, liquid AJAX, as the ceramic surface. Never use scouring powder, scouring sponges, steel wool, or any other cleaning agent, which can scratch the ceramic surface. 7 Tips on the use of the ceramic top hob unit Do not slide saucepans across the surface of the hob - always lift the pan when placing it on, or removing it from the ceramic surface. Wipe the bottom surface of the pots and pans with a clean dry cloth before placing them on the ceramic surface. This helps to reduce cleaning and prevents scratching the hob glass. Select the highest setting for the cooking zones until the food is brought to the boil, then reduce the setting. An uneven based saucepan may increase the electricity consumption by up to 50%. The saucepan should match the cooking zone or be slightly larger. Use a tightly fitting lid on the saucepan to reduce electricity consumption. 8 The decorative pattern on the ceramic surface can become scratched and marred with use, depending upon maintenance, but does not adversely affect performance. [. . . ] Unscrew the cover while connecting the cables. A unit led directly to the power point or the outlet rose. More units may be connected via one or more junction boxes. [. . . ]