User manual ZANKER ZKS5628IE

[. . . ] Geschirrspüler Dishwasher ZKS 5628 IE Bedienungsanleitung Instruction book Contents For the user Important safety information Description of the appliance The control panel Before use Setting the water softener Filling with salt Rinse aid Using your appliance Loading your appliance The lower basket The cutlery basket The upper basket Adjusting the height of the upper basket Use of detergent Hints and tips Washing programmes Operating sequence Maintenance and cleaning Internal cleaning Cleaning the filters External cleaning Prolonged periods of non-operation Frost precautions Moving the machine Something not working Service and spare parts Protection against flooding Hints for test centres Technical specifications 25 26 26 28 28 29 30 31 31 31 32 33 33 34 35 36 37 39 39 39 40 40 40 40 41 42 42 43 43 For the installer Installation instructions Water supply connections Water outlet hose connection Electrical connection 44 44 45 45 Guide to use the instruction book The following symbols will be found in the text to guide you throughout the instructions: Safety instructions 1. Step by step Hints and tips Environmental information 24 Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of your safety. [. . . ] Avoid contact between the dishes as far as possible. 35 Washing programmes Programme Degree of soil and type of load Any. Partial load (to be completed later in the day). Crockery, cutlery, pots and pans Recommended quantity of detergent wash prewash Cycle description 1. Rinse and Hold / / 1 cold rinse (to avoid food scraps from sticking together). Hot prewash Main wash up to 70°C 3 cold rinses 1 hot rinse Active drying Warm prewash Main wash up to 65°C 2 cold rinses 1 hot rinse Active drying Cold prewash Main wash up to 65°C 2 cold rinses 1 hot rinse Active drying Cold prewash Main wash up to 50°C 2 cold rinses 1 hot rinse Active drying Cold prewash Main wash up to 50°C 2 cold rinses 1 hot rinse Active drying Main wash up to 50°C 1 cold rinse 1 hot rinse Active drying Main wash up to 55°C 1 cold rinse 1 hot rinse Cold prewash Main wash up to 45°C 2 cold rinses 1 hot rinse Active drying 2. Intensive 70°C 25 g 10 g 3. Normal Plus 65°C with prewash Normal soil. Crockery, cutlery, pots and pans 25 g 10 g 4. Normal 65°C with prewash Normal soil. Crockery and cutlery 25 g 5g 5. Economy 50°C with prewash Light soil. Crockery and cutlery 25 g 5g * 6. Bio 50°C with prewash 7. Crockery and cutlery 25 g 5g Light soil. Delicate china and glassware This is a programme designed both to heat plates before serving or remove dust from dishes which have not been used for a long time. 30 g / ** 8. Delicate 45°C with prewash 30 g / 25 g 5g 10. Plate warmer / / 1 hot rinse * Testing programme for EN 50242 (see "Hints for Test Centres"). ** This is a special programme for quick washing a full load of lightly soiled dishes, glasses and crockery (except pots) so that you may re-use them promptly. 36 Operating sequence 1. Check the filters Ensure they are clean and properly positioned (see "Maintenance and cleaning"). 7a. Setting and starting the programme without "delay start" The selection of the programme occurs with the door partially opened. Press the "programme selector" push button until the required programme number appears in the digital display. To see the duration of the programme (in minutes), only with open door, press the "cancel" push button The following options may also be selected: Half load: by pressing the corresponding push button Eco drying/no drying by pressing the corresponding push button. Close the door, the programme will start automatically and an audible signal advises you of this. [. . . ] This will prevent deposits of sand or rust clogging the inlet hose filter. For making the connection itself, the coupling nut fitted to the machine's supply hose is designed to screw onto either a 3/4 inch gas thread spout, or to a purpose made quick-coupling tap such as the Pressblock. The water supply hose is fitted with a safety device, which prevents water from entering the machine should the inner hose split, due to wear. The problem is signalled by a red indicator which appears in the window (B - ). [. . . ]