User manual ZANUSSI 710D

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ZANUSSI 710D. We hope that this ZANUSSI 710D user guide will be useful to you.

Lastmanuals help download the user guide ZANUSSI 710D.


Mode d'emploi ZANUSSI 710D
Download
Manual abstract: user guide ZANUSSI 710D

Detailed instructions for use are in the User's Guide.

[. . . ] If this procedure is not respected, the technician will be required to charge for any eventual repairs. For hygiene and safety reasons, this appliance must always be kept clean (see instructions). This product was created to cook food and must not be used for other purposes. Do not cover the oven walls with aluminium foil, particularly the lower part of the cabinet itself. [. . . ] If the appliance does not come already fitted with a plug, fit a regulation plug suitable for the power indicated on the specification plate. If the plug fitted to the appliance is incompatible with the socket, get a professionally qualified person to fit the correct type of plug and ensure that the cable thickness is suitable for the appliance input power. If an appliance is not equipped with supply cable and plug, the power supply must be fitted with a disconnect switch in which the distance between contacts permits total disconnection in accordance with overvoltage category III, as required by installation regulations. The yellow/green earth wire should not be controlled by the switch. The plug or monophase switch used for mains supply connection should be easy to access when the appliance is in position. Important: position the mains supply cable so that it is never subjected to a temperature more than 50°C above room temperature. The appliances electrical safety can only be guaranteed when it has been correctly connected to a properly earthed power supply, as laid down in the regulations for electrical safety. Important: the manufacturer cannot be held responsible for any damage to persons or objects due to the lack of an earth connection. L N Supply single-phase 220-230 V~ Oven type section Type of cable 2 Rubber H05 RR-F or Gas oven 3 x 0, 75 mm Gas oven + electric grill 3 x 1, 5 mm2 Rubber H05 RN-F Preparation on the cabinet - The units in which the gas oven is to be installed must be built using an adhesive which withstands a temperature of 120°C. - Remember that some parts scratch easily; they therefore require special care during assembly. No specific openings are necessary for ventilation in the cabinet because this appliance is equipped with a cooling fan drawing air across the slots in the top and bottom of the unit. It is enough to respect the dimensions of the housing as in the fig. 1 and 2. Building-in 50 580min min 566 588min 20 min 550 450 860 597 min 550 50 4 100 895 15min 540 22 11 min 550 50 4 100 Fig. Assemble the knob and let the oven warm up for 15 minutes to the maximum position; after that turn the knob to the minimum position. After having removed the knob once again, making sure that the thermostat rod has not been moved, screw slightly the above mentioned by-pass screw, to obtain a flame of 3 or 4 mm of length. For butane/propane gas, the adjusting screw must be tight screwed. Make sure that the flame does not extinguish passing quickly from the maximum flow to the minimum flow, and closing and opening the oven door (the oven door must be closed softly). Open all windows wide to eliminate any odours and fumes produced by internal components. It is something normal, and in case it will occur, wait for the smoke to stop before introducing the food into the oven. The oven is fitted with: a rod shelf for cooking food contained in oven dishes or placed directly on the rod shelf itself, a drip-tray for cooking sweets, biscuits, pizzas, etc. , or for collecting juices and fats from food cooked directly on the rod shelf. warnings: do not cook foods on the bottom in the base of the oven. Attention: For safety reasons and the norms in force it is prohibited to use the gas oven burner at the same time as the gas/electric grill. MANUAL IGNITION OF OVEN BURNER Open the oven door and place a lighted match close to the hole of the oven bottom plate (fig. 4). Turn the knob anti-clockwise until the pointer to the maximum power (fig. 5), and keep the knob pressed for about 10 seconds to heat up the thermocouple bulb, and then release it. [. . . ] 7 P 1 2 G F L S 1 2 G Fig. 6 A Gently close the oven door against flap S (fig. 6 B ATTENTION: The flap and accessible parts may become very hot during use and during the necessary cooling period after the oven is turned off. 9 XGB Grill Cooking The heat comes from above. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ZANUSSI 710D

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ZANUSSI 710D will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag