User manual ZANUSSI BMN491E

[. . . ] 10 A U T O -+ FO 0336 FO O778 Fig. 20 ENGLISH Warning These warnings are provided in the interest of safety. You installing or using the appliance. MUST read them carefully before It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred, always ensure that the book is left with the appliance in order that the new owner can get to know the functions of the appliance and the relevant warnings. For Your Safety During Operation · This appliance has been designed to be operated by adults and children under supervision. [. . . ] When cooking is completed, an audible signal will be heard for approximately 2 minutes. To cancel press button A and return control and thermostat knobs to the OFF position. To set oven for manual operation, press button D. SETTING THE AUTOMATIC TIMER Press button B and while turning knob E enter the -+ required cooking time. Then press button C and while turning knob E enter the end of cooking time. Turn the thermostat and function control knobs to the required settings. The oven -+ temperature light nor oven light will not come on until the oven switches on. When cooking is completed, the "AUTO" signal will flash an audible signal will be heard for approximately 2 minutes. To cancel press button A and return control and thermostat knobs to the OFF position. A U T O A U T O SETTING THE MINUTE MINDER Press button A and while turning knob E enter the -+ required time (maximum 23 h 59 min. ) After required time has been selected the clock will revert to the time of day. When time is up an audible signal will be heard for approximately 2 minutes. To cancel press button A and return control and thermostat knobs to the OFF position. In case of loss of power, all the settings (time of day, setted programs or programs in operation) will be cancelled. When the power is restored, the numbers on the display will flash, and the timer has to be reset. 7 3. When the oven is first installed Once the oven has been installed: a) set the thermostat knob to MAX; b) switch the oven function control knob to conventional cooking ( ); c) allow the oven to run empty for approximately 45 minutes; d) open a window for ventilation. 7. Conventional cooking Turn the oven function control knob to the relevant symbol ( ) and set the thermostat knob on the required temperature. If you need more heat from the bottom or from the top, turn the oven function control knob to (top heating element only) or (bottom heating element only). Thermal grilling Turn the oven function control knob to the relevant ) and set the thermostat knob on the symbol ( required temperature. Select a maximum temperature of 200°C. The full grill element and the oven fan operate alternately, circulating hot air around the food. The need to check and turn food is reduced. With the exception of toast and rare steaks, you can thermal grill all the foods you would normally cook under a convetional grill. When food is heated, it produces steam which can condense and produce water droplets. This is quite normal and is not caused by fault of the oven. We recommend you to wipe away condensation after all cookings. The Fan Oven ( ) Turn the oven function control knob to the relevant symbol ( ) and set the thermostat knob on the required temperature. The fan situated behind the back panel circulates heated air into the oven. 8 Hints and Tips on Cooking Fish and Meat You can place meat in oven proof dishes, or directly on the oven shelf. In this case, remember to place the dripping pan in the first position from the bottom (see Fig. [. . . ] No. ) marked on the identification plate. This plate is placed on the front external edge of the oven cavity, as indicated in Fig. 14. Original spareparts, certified by the product manufacturer and carrying this symbol are only available at our Service Centre and authorized spareparts shops. 9. Guarantee Your new appliance is under guarantee. [. . . ]