User manual ZANUSSI DE6955

[. . . ] GESCHIRRSPÜLER DISHWASHER DE 6955 D GB Bedienungsanleitung Instruction book Contents Safety instructions Disposal Economical and ecological dishwashing Description of the appliance The control panel Prior to using for the first time Setting the water softener Filling with salt Rinse aid In daily use Loading cutlery and dishes The lower basket The cutlery basket The upper basket Adjusting the height of the upper basket Use of detergent Washing programmes Starting a washing programme Maintenance and cleaning Cleaning the filters Prolonged periods of non-operation Frost precautions Moving the machine What to do, when. . . Service and spare parts 22 22 22 23 23 24 24 25 26 27 27 28 28 29 29 30 31 32 34 34 34 34 34 35 36 Installation instructions Building-in Levelling Fixing to adjacent units Water supply connections Water inlet hose with safety valve Water outlet hose connection Electrical connection Hints for test centres 37 37 37 37 37 37 38 38 39 Technical specifications Dimensions Width Height with worktop Height without worktop Max depth 60 cm 85 cm 82 cm 63. 5 cm Electrical connection: Voltage Overall power Fuse Water supply pressure Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher's door on the right. Minimum Maximum 50 kPa (0. 5 bar) 800 kPa (8 bar) 12 place settings Capacity This appliance complies with the following E. E. C. Directives: - 73/23 or 19. 2. 73 (Low Voltage Directive) and subsequent modifications; - 89/336 or 3. 5. 89 (Electromagnetic Compatibility Directive) and subsequent modifications. 21 Safety instructions It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. [. . . ] Crockery, cutlery, pots and pans Warm prewash Main wash up to 70°C 2 warm rinses 1 hot rinse Drying Cold prewash Main wash up to 65°/50°C 1 cold rinse 1 hot rinse Drying Main wash up to 60°C 1 hot rinse Cold prewash Main wash up to 50°C 1 warm rinse 1 hot rinse Drying Main wash up to 45°C 1 warm rinse 1 hot rinse Drying 85 - 95 1, 65 - 1, 85 22 - 24 AUTO 65° - 50° Normal soil. Crockery and cutlery 90 - 100 1, 1 - 1, 4 13 - 20 60° A 30' (1) ECO 50° (2) Fresh soil. Crockery and cutlery 30 0, 8 9 Normal soil. Crockery and cutlery 130 - 150 0, 95 - 1, 05 14 - 16 45° Light soil. Delicate china and glassware 75 0, 9 15 (1) Ideal for washing crockery and cutlery of breakfast and dinner (fresh soil). This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery. (2) Testing programme for EN 50242 (see "Hints for Test Centres). This programme, developed for the use of detergents with enzymes, allows you to achieve, with reduced consumption of energy the same cleaning results that would otherwise be obtained only with the 65°C programmes and conventional detergents. To compensate the lower temperature, the duration of the programme has been extended. (3) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply. "AUTO" washing programme During the "AUTO" washing programme the amount of soil on the dishes is determined by how cloudy the water is. If the appliance is partially loaded and the dishes lightly soiled, the "prewash"", main wash", and "rinse" phases of the programme are shorter and the water consumption level is lower. If the appliance is fully loaded and the dishes heavily soiled, the "prewash"", main wash", and "rinse" phases of the programme are longer and the water consumption level is higher. For this reason the programme duration, water and energy consumption levels can vary within the stated range for AUTO programme (see "Washing programmes chart"). During the "AUTO" programme the temperature of the main wash water is also automatically adjusted between 50°C and 65°C depending on the amount of soil on the dishes. 31 Starting a washing programme 1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely 2. Press the On/Off push button The On/Off indicator light illuminates. To cancel a washing programme in progress q Press simultaneously the function push buttons 2 and 3 for about 2 seconds, all the indicator lights will turn off (except for the On/Off indicator light) indicating that the running programme has been cancelled and that the machine has returned to setting mode. It is now possible to select and start a new washing programme. 7. Setting the "delay start" The setting of the delay start occurs before selecting the programme. 5. Setting and starting the programme Press the push button of the programme you wish to select. (See "Washing programmes" chart for the number of the programme). The corresponding indicator light illuminates and in the digital display will flash the running time of the programme. The indicator lights of the phases foreseen for the programme will illuminate. [. . . ] Hooked over the edge of the sink using the special curved plastic guide provided. To a stand pipe provided with vent-hole, minimum internal diameter 4 cm. The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher. The drain hose can face either to the right or left of the dishwasher Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water. [. . . ]