User manual ZANUSSI ZBX626SS

[. . . ] Read the booklet thoroughly before you use the appliance. Keep the booklet in a safe place so that anyone who uses the appliance can read it. Pass the booklet on with the appliance if you give or sell it to someone else. For your safety This appliance is not intended to be operated by means of an external timer or separate remote control system. This appliance is designed for domestic use to cook food. [. . . ] 27 Slow cooking ZCG 7551X Care and cleaning ZCG 7551X Care and cleaning For your safety For hygiene and safety reasons you must keep this gas appliance clean. A build up of fat or other foodstuff could cause a fire. Try to mop up spills and splashes as soon as they happen. But be careful as parts of the appliance will be hot. Do not use any polishes, caustic cleaners, abrasives, washing soda or soap except those recommended. Please note: If we recommend you use hot soapy water we mean hot water with washing up liquid in it and not any other cleaning product. If you own a dishwasher please read the operating instructions for the machine before you wash any part of your appliance in it. Clean your appliance regularly using a cloth that has been wrung out in hot soapy water. Rinse and polish it dry using a soft cloth. Stainless Steel cream cleaners are abrasive and should be avoided as they may damage the surface finish. When you remove parts of your appliance for cleaning do not plunge them into water whilst they are very hot as this may damage the finish of the parts. Cleaning the plated handles and control knobs (Where applicable) Do not remove the control knobs from the appliance as damage may occur. When the crown is in this position let it fall freely on to the body. Check that the crown can be moved slightly from side to side. Cap to crown Place cap centrally on the top of the crown (enamel side up). Move sideways and front to back to check the cap is properly fitted. Check for ignition If a burner will not light then you need to check the crown and cap positions. 29 Care and cleaning ZCG 7551X Care and cleaning ZCG 7551X The grill Do not clean the grill burner itself. The burner is designed to be self cleaning. Cleaning the grill may cause the holes in the burner to become blocked preventing it from operating correctly. Please note that due to the nature of stainless steel the grill burner may tarnish through use over a period of time. This is quite normal and is not a fault on the appliance. Clean the area around the grill frequently using hot soapy water. After use you can soak the pan for a few minutes and then clean it using mild abrasives or a soap filled pad such as 'Brillo'. [. . . ] Turn the oven thermostat knob to Mk 9 and press the ignition button. As soon as the burner is alight the button can be released. There should now be a low gas rate to the burner, which is the F. S. D. valve which allows the main gas supply to the oven burner. [. . . ]