User manual ZANUSSI ZC240F

[. . . ] FREEZER ZC 240 F INSTRUCTION BOOKLET 2222 044-83 This document was created with FrameMaker 4. 0. 4 CONTENTS Warnings . . page 3 4 4 4 4 5 5 6 6 6 6 6 7 8 8 8 8 9 9 9 9 Installation . . page Cleaning the appliance's interior . . page Changing the opening direction of the door . [. . . ] One or more adjustable feet mounted on the base of the appliance make it possible to set it perfectly level. 1 5mm Cleaning the appliance's interior A B Before using the appliance for the first time, wash all internal parts with lukewarm water and neutral soap so as to remove the typical «new» smell and then dry thoroughly. Do not use detergents or abrasive powders as these will damage the finish. D174 4 Changing the opening direction of the door Unplug the freezer before performing the following operations: Remove the ventilation grill (D-Fig. 2 Reverse the direction of the handle. The unused opening direction is concealed by plastic plugs. Therefore, these plugs are to be mounted on the holes left free. 4 E F G G D D162 F D071 Remove the door from the upper pivot (A-Fig. Remove the pivot and the washer (A+B-Fig. 3) from the upper hinge (C), then mount these on the opposite side. 3 If, after having reversed the door, it is not in line with the unit, the top hinge can be adjusted. To do this, use a 10 mm spanner as shown in Fig. 3; slacken the nut, align the door by pushing it to the left or right, then re-tighten the nut. Attention After completion of the door reversibility operation, verify that the door gasket is adherent to the cabinet. If the ambient temperature is cold (i. e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket or accelerate this process by heating up the part involved with a normal hairdrier. C B A Reversing the quick-freezing compartment door (Fig. 5) Unscrew the closing prong support (H). Unscrew the two hinges (I) and remove the door. Turn the closing prong support and fix it to the other side of the quick-freezing compartment. Reverse the door and the hinges and mount them on the other side of the compartment. Check to see that the door closes correctly. 2) on the opposite side by using the screws previously removed. [. . . ] If a thick layer of ice is formed it will be necessary to carry out complete defrosting as following: set the thermostat knob to «O» position or unplug the appliance from the mains socket; wrap frozen food in several layers of newspaper and place the food packages in a cool place; leave the door open. Introduce the plastic scraper in the appropriate seating at the bottom center, as shown in figure, place underneath a basin to collect the defrost water. 8 Helpful hints Always check the preparation date indicated on the frozen foods you buy and respect the expiration time provided by the producer. Do not open the freezer door too often and leave it open only for the minimum time necessary. [. . . ]