User manual ZANUSSI ZCM1031X

[. . . ] ELECTRIC DOUBLE OVEN AND GRILL WITH GAS HOB ZCM 1030 X ZCM 1031 X INSTRUCTION BOOKLET For your safety Warning: You must read these warnings carefully before installing or using the appliance. If you need assistance, contact our Customer Services Department on 08705 727727. The product should only be used for its intended purpose which is for the cooking of domestic foodstuffs. Under no circumstances shouid any external covers be removed for servicing or maintenance except by suitably qualified personnel. [. . . ] To stop it, push any one of the function buttons. Start programme and check The programme starts 4 seconds after it has been set. The programme can be checked at any time by pressing the corresponding button. Setting error A setting error is made if the time of day on the clock falls within the cooking start and end times. To correct the setting error, change the cooking time or cooking end time. The relays switch off when a setting error is made. Cancelling a setting To cancel a setting, press the cooking time button and then press the - button until 00 00 appears on the display. A set programme will automatically cancel on completion. Minute minder A Cooking time Cooking end Manual Subtract time Add time Fig. 5 Setting To set, press and release the desired function, and within 5 seconds set the time with + and - buttons. The + and - buttons increase or decrease the time at a speed depending on how long the button is pressed. Setting the time Press any two buttons (cooking time, end time, minute minder at the same time, and + or - button to set the desired time. This deletes any previously set programme and the AUTO symbol flashes. Manual use By pressing the manual button the AUTO symbol switches off and the saucepan symbol lights up. Manual operation can only be enabled after the automatic programme is over or it has been cancelled. Automatic use Press the cooking time or end time button to switch automatically from the manual to the automatic function. Semi-automatic use with cooking time setting Press the cooking time button and set the desired time with + or -. The AUTO and cooking time symbols light up continuously. When the cooking end time corresponds to the time of day, the relay and cooking time symbol switch off, the sound signal rings and the AUTO symbol flashes. Semi-automatic use with end time setting Press the end time button. The AUTO and cooking time symbols light up continuously. When the cooking end time corresponds to the time of day, the relay and the cooking time symbol switch off. When the cooking time is up, the AUTO symbol flashes, the sound signal rings and both the relay and the cooking time button switch off. 8 CARE AND MAINTENANCE Before cleaning the appliance, switch off the electrical supply at the control switch. [. . . ] 13 INLET ELECTRICAL CONNECTION This appliance must be installed by a qualified person in accordance with the latest edition of the IEE Regulations and in compliance with the manufacturer instructions. Ensure that the voltage is the same as that stated on the rating plate. The rating plate can be found on the back cover of this book. THIS APPLIANCE MUST BE EARTHED The cooker must be connected to a suitable cooker control unit incorporating a double pole switch having a contact separation of at least 3mm in all poles, which is adjacent to (but not above), and not more than1. 25m away from the cooker and easily accessible. [. . . ]