User manual ZANUSSI ZCMID

[. . . ] OPERATING AND INSTALLATION INSTRUCTIONS DUAL FUEL COOKER MODEL ZCM ID n oit c u d or t nI ZCM ID Introduction This gas oven has been designed and manufactured to all the necessary British Standards. The cooker complies with European Council Directive 90/396/EEC. It is important that you understand how to use and care for the oven properly before you use it for the first time. We have written this booklet with your safety in mind. [. . . ] Then you can remove the dirty parts and clean them before the spill 'burns on'. 30 Clean the burner crowns by soaking them in very hot soapy water. You can remove any stubborn stains by scouring with a soap filled pad such as 'Brillo'. If you look after the burner crowns in this way they will stay reasonably clean. However the surface will dull with time. Aluminium based saucepans can leave shiny metal marks on the pan supports. Clean the pan supports regularly to remove the marks using a mild abrasive like 'Jif' with a soft scourer. For more stubborn marks you can use a soap-filled pad such as 'Brillo'. After cleaning the cooker parts, dry them thoroughly before you put them back. When replacing hotplate burner parts 1. Crown to body (Do not try to force the crown on to the body). Make sure that the hole in the crown is over the electrode. Check that the two longer location pegs sit in the slots in the body. When the crown is in this position let it fall freely on to the body. Check that the crown can be moved slightly from side to side. Cap to crown Place cap centrally on the top of crown (enamel side up). Move sideways and front to back to check the cap is properly fitted. Check for ignition If a burner will not light then you need to check the crown and cap positions. Grill and oven furniture Clean the grill, and oven furniture frequently. After use you can soak the grill pan, meat tin and trivet for a few minutes and then clean it using mild abrasives or a soap filled pad such as 'Brillo'. Clean the grilling grid, handle and shelf using hot soapy water. Mild abrasives can be used if necessary. The heat in the oven will change the colour of the solid plate on the top oven shelf. You must not remove the solid plate from the shelf. [. . . ] Rotate the left hand clock knob to manual and back to the clock Time Setting position. Set the time of day by rotating the right hand knob. Rotate the left hand clock knob back to the manual position. 1. 4. Fig. 5 NOTE: When setting the time of day with the selector knob in the Time Setting position only, this will activate the timer for seven seconds after selection. [. . . ]