User manual ZANUSSI ZDC47100W

[. . . ] User Manual Tumble Dryer ZDC 47100 W Welcome to the world of Electrolux Thank you for choosing a first class product from Electrolux, which hopefully will provide you with lots of pleasure in the future. The Electrolux ambition is to offer a wide variety of quality products that make your life more comfortable. You find some examples on the cover in this manual. Please take a few minutes to study this manual so that you can take advantage of the benefits of your new machine. [. . . ] "Filter cleaning" light This light illuminates at the end of the programme to remind you that the filters must be cleaned. "Empty tank" light This light comes on at the end of the programme to remind you that the water reservoir must be emptied out. If this light illuminates during a programme this means that the water reservoir is full. The buzzer sounds, the programme stops, the light of the Start/Pause button flashes. "Condenser cleaning" light It comes on every 80 cycles to remind you that the condenser must be 11 cleaned. At the end of the programme All drying programmes end with a 10 minute cooling phase. You may remove the laundry after this phase. The lights Filter and Empty Tank, illuminate. If the laundry is not removed at the end of the cycle, the dryer performs an anti-creasing phase (duration: 30 minutes maximum). If you do not remove the laundry, the dryer will stop automatically at the end of the anti-creasing phase. The Lights Filter and The Empty Tank remain lit and the buzzer sounds for 2 minutes. Turn the programme selector dial to "Off" to switch the machine off. Remove the laundry from the drum and carefully check that the drum is empty. If you do not intend to carry out another wash, close the water tap. Leave the door open to prevent the formation of mildew and unpleasant smells. Turn the programme selector dial to "Off"; all the lights go out. If you open and then close the door before turning the selector dial to"Off" all the lights corresponding tothe phases making up the performed programme come on. After each use · Clean the filters. Modifying the programme To change a programme which is running, first cancel it by turning the pro12 gramme selector dial to "Off". Select the new programme and press the Start button. Care and cleaning You must DISCONNECT the appliance from the electricity supply, before you can carry out any cleaning or maintenance work. External cleaning Use only soap and water and then dry thoroughly. Cleaning the door Important: do not use methylated spirit, diluents or similar product. Open the door. Cleaning the filters Clean periodically the interior part of the door to remove any fluff from the seals around the filter. Accurate cleaning ensures correct drying. Your dryer will only function well if the filters are clean. The filters collect all the fluff which accumulates during drying and they must therefore be cleaned at the end of each programme, before removing the laundry, with a damp cloth. [. . . ] · The appliance has been used for normal domestic purposes only, and in accordance with the manufacturer's instructions. · The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any person not authorised by us. · Electrolux Service Force Centre must undertake all service work under this guarantee · Any appliance or defective part replaced shall become the Company's property. · This guarantee is in addition to your statutory and other legal rights. [. . . ]