User manual ZANUSSI ZDF490X

[. . . ] BUILT-IN ELECTRIC DOUBLE OVEN ZDF490 INSTRUCTION BOOKLET TECHNICAL DETAILS MODEL NO. ZDF 490 Voltage: Wattage: Height: Width: Depth: Weight 230/240 Volts AC 50Hz 4. 5/4. 9kW 897mm 592mm 563mm (excluding handles and knobs) 55kg This appliance complies with: European Council Directive 73/23/EEC. CE Marking Directive 93/68/EEC. 2 CONTENTS Technical Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If necessary press the decrease control ( - ) until the correct time interval is achieved. The time of day will be displayed after 5 seconds. The 'Cook Time' ( ) and 'End Time' ( ) indicators will be illuminated. The 'End Time' must not be more than 23 hours 59 minutes from the time of day. For example, if the time of day is 09. 00 a. m. , the latest 'End Time' would be 08. 59 a. m. vii) Set the main oven control to the required temperature. Note: When the automatic timed period starts, the oven indicator neon will turn ON and OFF periodically during cooking, showing that the temperature is being maintained. i) Fig. 6. 16 B) TO SET THE TIMER TO SWITCH OFF ONLY i) Ensure the electricity supply is switched ON and that the correct time of day is displayed, e. g. Fig. 9. ii) iii) To set the length of cooking time, press the Selector Control button until the 'Cook Time' ( ) indicator is illuminated. Press the increase control ( + ) until the required length of cooking time is displayed, e. g. Depress the decrease control ( - ) if necessary. The 'Cook Time' indicator ( ) will illuminate and the time of day will be displayed after 5 seconds. vi) To check the 'End Time' during the cooking period, simply press the Selector Control button once and the remaining time will be displayed, as Fig. TO CANCEL AN AUTOMATIC PROGRAMME i) To cancel an automatic programme press the Selector Control button until the 'Cook Time' indicator ( ) neon flashes. Press the decrease control ( - ) until the display reads 0. 00 as Fig. The 'Cook Time' indicator ( ) will flash and after 5 seconds return to the time of day. Fig. 12. ii) iii) Turn off oven control. 5. TO RETURN THE APPLIANCE TO MANUAL At the end of a timed cooking period, the indicator neon will flash and an alarm will sound for up to 2 minutes. i) ii) To stop the sound press any of the three buttons, as Fig. The display will return to the time of day. 13. iii) Turn off the oven controls. 17 6. THINGS TO NOTE In the event of an interruption of the electricity supply, the timer will reset itself to zero, and all programming will be cancelled. 7. AUTOMATIC COOKING It is advisable to leave food in the oven for as short a time as possible before automatic cooking. [. . . ] * Ensure you purchase an accurate good quality instrument. * Ovens will cycle about a set temperature and will not be constant. * Check that the appliance is correctly installed and that it is level. * Check that the recommended temperatures and shelf positions are being used. 31 SERVICE AND SPARE PARTS In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Service Force Centre by telephoning:- 0870 5 929929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. [. . . ]