User manual ZANUSSI ZDI6053X

[. . . ] DISHWASHER ZDI 6053 www. zanussi. co. uk 152956 61/0 INSTRUCTION BOOK UK Contents Safety instructions Disposal Economical and ecological dishwashing Description of the appliance The control panel Prior to using for the first time The water softener Filling with dishwasher salt Rinse aid In daily use Loading cutlery and dishes The lower basket The cutlery basket The upper basket Adjusting the height of the upper basket Use of detergent Different kinds of detergent Washing programmes Starting a washing programme Maintenance and cleaning Cleaning the filters Prolonged periods of non-operation Frost precautions Moving the machine What to do, when. . . Service and Spare Parts Customer Care Department Guarantee Conditions 3 3 3 4 4 6 6 7 7 8 8 8 9 9 10 10 11 12 13 14 14 14 14 14 15 17 17 18 Installation instructions Building-in Levelling Fixing to adjacent units Water supply connections Water outlet hose connection Electrical connection Hints for test centres 19 19 19 19 19 20 20 21 Technical specifications Dimensions Width Height Max depth Max depth with open door 59. 6 cm 81. 8 - 87. 8 cm 57. 5 cm 114 cm Electrical connection: Voltage Overall power Fuse Water supply pressure Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher's door. Minimum Maximum 50 kPa (0. 5 bar) 800 kPa (8 bar) 12 place settings Capacity This appliance complies with the following E. E. C. Directives: - 73/23 or 19. 2. 73 (Low Voltage Directive) and subsequent modifications; - 89/336 or 3. 5. 89 (Electromagnetic Compatibility Directive) and subsequent modifications. 2 Safety instructions It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. [. . . ] 65°C C Main wash up to 65°C 1 hot rinse Cold prewash Main wash up to 50°C 1 cold rinse 1 hot rinse Drying 1 cold rinse (to avoid food scraps from sticking together). This programme does not require the use of detergent. 25 - 35 0, 7 - 0, 8 8 (2) Bio 50°C Normal soil. Partial load (to be completed later in the day). D 136 - 146 0, 95 - 1, 05 13 - 15 Rinse & Hold E 12 < 0, 1 4 (1) Ideal for washing crockery and cutlery of breakfast and dinner (fresh soil). This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery. (2) Testing programme for EN 50242 (see "Hints for Test Centres"). This programme, developed for the use of detergents with enzymes, allows you to achieve, with reduced consumption of energy the same cleaning results that would otherwise be obtained only with the 65°C programmes and conventional detergents. To compensate the lower temperature, the duration of washing and drying have been extended. (3) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply. With programme Normal 65°C the water temperature of the last rinse will be kept above 65°C for at least 10/11 minutes. This allows a greater degree of hygiene of dishes and glasses, or jam jars. 12 Starting a washing programme 1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely 2. Setting and starting the programme Turn the programme selector dial until the marker on the dial corresponds with the desired programme (see "Washing programmes" chart). The indicator lights of the phases foreseen for the programme start flashing. Press the start/cancel button, the programme starts automatically and the start/cancel indicator light turns on. The indicator light of the phase in progress is illuminated. NOTE: during the running of the programme, it is not possible to change the selection made by positioning the programme selector dial in correspondence of another programme. If you want to change the running washing programme you must cancel the selection made (see "To cancel a washing programme in progress"). NOTE: the washing programme will begin only after having pressed the start/cancel button. Until that moment it is possible to modify the selection made. When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off. 6. End of the washing programme The dishwasher will stop automatically. The turning on of the END indicator light indicates that the programme has ended. [. . . ] The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher. The drain hose can face either to the right or left of the dishwasher Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water. The sink plug must not be in place when the machine is draining as this could cause the water to syphon back into the machine. If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided. Electrical connection This appliance must be earthed. [. . . ]