User manual ZANUSSI ZDI6896

[. . . ] This information has been provided in the interest of your safety. You MUST read it carefully before installing or using the appliance. Installation q q q q q q q q q q q This appliance is heavy. It is dangerous to alter the specifications or attempt to modify this product in any way. Care must be taken to ensure that the appliance does not stand on the electrical supply cable. [. . . ] Crockery, cutlery, pots and pans 20 g 10 g Normal soil. Crockery, cutlery, pots and pans 20 g 10 g * 4. Daily 80I 5. Normal 65°C no prewash Bio 50°C with prewash 7. Crockery and cutlery 20 g 10 g Light soil. Crockery and cutlery 30 g / ** 6. Normal soil. Crockery and cutlery 20 g 10 g Light soil. Crockery, cutlery and party crockery 30 g / *** 8. Delicate 45°C with prewash 30 g / Normal soil. Delicate china and crockery 25 g 5g 10. Crystal glass and delicate glassware 25 g 5g **** 11. Crockery and cutlery This is a programme both designed to heat plates before serving or remove dust from dishes which have not been used for a long time 20 g / / / 1 hot rinse * Ideal for washing a complete load of 12 place settings with normal soil. Pull the upper basket out and arrange the plates, saucers, glasses and cups etc. Slide the baskets back into the machine. 8b. Setting and starting the programme with "delay start" Once a programme and required options (see point 8a) have been selected to use DELAY proceed as follows: Press the DELAY push button. The digital display will show "h 0". Press the button again to select the number of hours by which you wish to delay the programme start (up to a maximum of 12 hours). The delay start will not modify the settings made previously . To set the time setting to zero press the DELAY push button until "h 0" appears in the digital display. The digital display shows the delay time required before the start of the programme that will decrease from hour in hour. The start of the countdown will be confirmed by the flashing "h" in the digital display. The phase indicator lights will turn off, only the indicator lights of the options (drying and/or half load), if selected, will remain on. Once the delayed time has elapsed the programme will start automatically. [. . . ] Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided. This dishwasher must be plumbed into a cold water supply. The water pressure must be within the limits given in the technical specifications. Your local Water Authority will advise you on the average mains pressure in your area. The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation. [. . . ]