User manual ZANUSSI ZECR 161 W

[. . . ] ZANUSSI REFRIGERATOR ZECR 161 W INSTRUCTION BOOK GB 200364838 A/ZE/12. (03. ) This instruction book contains safety precautions, information on use and helpful hints and tips. To ensure you use this appliance effectively and safely, please read this instruction book carefully before installing or using this appliance and retain for future reference. The symbols below help you to find things more easily: Safety precautions Warnings and Safety information Hints, useful information Environmental information 2 IMPOR TANT S AFET Y INS TR UCTIONS These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using this appliance. [. . . ] Partially thawed food must not be refrozen, it must be consumed within 24 hours. Never exceed the storage times indicated. Do not open the ice-making compartment door too often and do not leave open longer than necessary. 8 Time and method of storage of fresh foods in the refrigerator Foods Raw meat Cooked meat Roasted meat Raw minced meat Cooked minced meat Cold cuts Fresh fish Cooked fish Tinned fish, open Fresh chicken Fried chicken Fresh duck, goose Roasted duck, goose Butter unopened Butter opened Milk Cream Sour cream Cheese (hard) Cheese (soft) Egg Spinach, sorrel Green peas, green beans Mushroom Carrot Tomato Cabbage Strawberry, raspberry, etc. Tinned fruits opened Cakes filled with cream Notation: X x recommended storage time maximum recommended storage time Storage time in days 3 4 5 6 x x x X x x x X x x x x x x x X X X X X x X x X X X X x X x X X X X X x x x x x x x X X x x x X X X X x X x X X X x x x x x x x X x x x X x X x x X X X x x x x x x X x x X x X x X X x Method of packaging cling film, airtight dish covered dish covered dish covered dish covered cling film, cellophane, greaseproof paper cling film, airtight dish covered dish covered cling film, airtight dish covered cling film, airtight dish covered original packaging original packaging original packaging plastic box plastic box aluminium foil cling film cling film cling film cling film cling film cling film cling film cling film dish covered dish covered S t or age time char t 1 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 2 X X X X X x X x X X X X X X X X X X X X X X X X X X X X X 7 x X x x X x X x X X x 9 Maint enance & Cleaning Before any maintenance of cleaning work is carried out DISCONNECT the appliance from the ELECTRICITY SUPPLY. To carry out complete defrosting proceed as follows: 1. Place a tray on the upper shelf of the refrigerator under the drain hole of the drip tray. Remove any food from inside the ice-making compartment, wrap it in several sheets of newspaper and store in a cool dry place. Turn the thermostat knob on position << 0 >>. To accelerate defrosting, place a bow of hot water inside the compartment (with a piece of cardboard underneath the bowl as protection). When defrosting is completed, dry thoroughly and remove the water collected in the tray. Turn the thermostat knob on a medium position to restart the appliance. After letting the appliance run for at least half an hour replace the previously removed food into the ice-making compartment. When defrosting it is not necessary to remove the foods from the inner door and the refrigerator compartment. Internal Cleaning Clean the inside and accessories with warm water and bicarbonate of soda (5 ml to 0. 5 litre of water). The thermostat control knob is set too low. The temperature in the appliance is too low Excessive frost and ice has built up The appliance is noisy. The thermostat control knob is set too high. Solution Check there is power at the socket. Check there is not a power cut by checking the household lights. Check the thermostat control knob setting. Check the ambient temperature is within the appliances operating limits of 12 °C to 32 °C. Check that the thermostat control knob is turned to the correct setting relative to ambient conditions. Set the thermostat control knob to a lower position. [. . . ] Slot the hinge pin into the hole in the hinge plate and relocate the hinge assembly to the opposite location and refit using the retaining screws. Put the cabinet in the upright position. 16 To reverse the top hinge assembly proceed as follows: Remove the 2 worktop retaining screws from the back of the appliance. Slide the worktop towards the rear and lift clear of the appliance. Remove the 2 upper hinge plate retaining screws. Remove the hinge plate from the top of the door. [. . . ]