User manual ZANUSSI ZFL1015

[. . . ] Read the booklet thoroughly before you use the appliance. Keep the booklet in a safe place so that anyone who uses the appliance can read it. Pass the booklet on with the appliance if you give or sell it to someone else. For your safety This appliance is not intended to be operated by means of an external timer or separate remote control system. This appliance is designed for domestic use to cook food. [. . . ] A build up of fat or other foodstuff could cause a fire. Try to mop up spills and splashes as soon as they happen. But be careful as parts of the appliance will be hot. Do not use any polishes, caustic cleaners, abrasives, washing soda or soap except those recommended. Please note: If we recommend you use hot soapy water we mean hot water with washing up liquid in it and not any other cleaning product. If you own a dishwasher please read the operating instructions for the machine before you wash any part of your appliance in it. Clean your appliance regularly using a cloth that has been wrung out in hot soapy water. Rinse and polish it dry using a soft cloth. Stainless Steel cream cleaners are abrasive and should be avoided as they may damage the surface finish. When you remove parts of your appliance for cleaning do not plunge them into water whilst they are very hot as this may damage the finish of the parts. Cleaning the handles and control knobs Do not remove the control knobs from the appliance as damage may occur. It is strongly recommended that only hot soapy water and a soft cloth is used for cleaning the door handles and control knobs. Check that the crown can be moved slightly from side to side. Cap to crown Place cap centrally on the top of the crown (enamel side up). Move sideways and front to back to check the cap is properly fitted. Check for ignition If a burner will not light then you need to check the crown and cap positions. 30 The grill Do not clean the grill burner itself. The burner is designed to be self cleaning. Cleaning the grill may cause the holes in the burner to become blocked preventing it from operating correctly. Please note that due to the nature of stainless steel the grill burner may tarnish through use over a period of time. This is quite normal and is not a fault on the appliance. Clean the area around the grill frequently using hot soapy water. After use you can soak the pan for a few minutes and then clean it using mild abrasives or a soap filled pad such as 'Brillo'. Clean the grill shelf using hot soapy water. [. . . ] Turn the left hand knob to the 'Stop' position; the time shown on the display is now the time of day with two minutes added on. Rotate the right hand knob to add two minutes to this time to give a two minute delay. Turn the left hand knob to the 'Auto' position to complete the programming sequence, the clock now shows the time of day again with 'Auto' glowing continuously. Turn the oven thermostat on and two minutes after setting, the oven burner should commence its lighting sequence. [. . . ]