Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ZANUSSI ZHP615WM. We hope that this ZANUSSI ZHP615WM user guide will be useful to you.
Lastmanuals help download the user guide ZANUSSI ZHP615WM.
Detailed instructions for use are in the User's Guide.
[. . . ] · For Class I appliances, check that the domestic power supply guarantees adequate earthing. Connect the extractor to the exhaust flue through a pipe of minimum diameter 120 mm. [. . . ] · Clean and/or replace the Filters after the specified time period. · Clean the hood using a damp cloth and a neutral liquid detergent.
650 mm min.
GB
9
CHARACTERISTICS
Dimensions
ø 120
280 60 0÷152
Components
12a Ref. 12a 20 Q. ty Installation Components 4 Screws 4, 2 x 44, 4 Q. ty Documentation 1 Instruction Manual 1 Warranty Q. ty Product Components 1 Hood Body, complete with: Controls, Light, Blower, Filters 1 Closing element
GB
175
10
INSTALLATION
Drilling the Support surface and Fitting the Hood
SCREW FITTING · The hood support surface must be 135 mm above the bottom surface of the wall units. · Drill the support with a ø 4, 5 mm drill bit, using the drilling template provided. · Cut a hole ø 125 mm in size on the support surface, using the drilling template provided. · Fix using the 4 screws 12a (4, 2 x 44, 4) provided. 125
12a
SNAP-ON FITTING · The hood can be installed either directly on the bottom surface of the wall units (min. 650 mm above the hob) using snap-on side supports. · Cut a fitted opening in the bottom surface of the wall unit, as shown. · Insert the hood until the side supports snap into place. · Lock in position by tightening the screws Vf from underneath the hood.
264 15 60
Vf
GB
135
11
CLOSING ELEMENT · The space between the edge of the hood and the rear wall can be closed by applying the element 20 provided, using the screws supplied for this purpose.
20
DUCTING TO THE REMOTE BLOWER The hood must be ducted to the remote blower using either a flexible or rigid pipe ø 120 mm.
ELECTRICAL CONNECTION · Connect the hood to the mains through a two-pole switch having a contact gap of at least 3 mm. · When opening the sliding carriage for the first time after installing the hood, pull it out briskly until it clicks.
GB
12
USE
Control panel
L V Light Speed Switches the lighting system on and off. [. . . ] Cet équipement est conforme à la norme européenne sur la basse tension C. E. E. 73/23 relative à la sécurité électrique et aux normes européennes: C. E. E. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ZANUSSI ZHP615WM
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ZANUSSI ZHP615WM will begin.
