User manual ZANUSSI ZIDW954

[. . . ] INSTRUCTION BOOKLET DISHWASHER ZIDW 954 CONTENTS Warnings . page Positioning, levelling, water supply connections, water outlet connection, electrical connections . page Use of rinse aid, use of detergent. page Loading the machine, use of the lower basket, use of the upper basket . [. . . ] Silver cutlery tends to go black if mixed with steel cutlery. Place it in the cutlery basket separate from the others. Iron and cast iron objects can rust and stain other items. Aluminium tends to go black; copper, pewter and brass tend to stain. Caution: You are advised not to load very small items which can fall through the baskets. Note: When buying new dishes, ensure that they are dishwasher-proof. To save energy Do not prewash dishes under running water. Place dishes in the machine immediately after every meal and wait until the dishwasher is full before washing. If necessary run the Rinse and Hold programme (see Programme Chart on the following pages), so that any food scraps do not become caked on the dishes while you are waiting to run the complete wash programme. Select an economic programme when the baskets are not very full and/or when the dishes are not very soiled, following the instructions given in the «Washing programmes» chart. Select «ECONOMY DRY», in this case the last rinse water is not heated, with a significant saving in energy. Drying will obviously be less effective in this case. PCL24GB 9 WASHING PROGRAMMES Recommended quantity of detergent Degree of soil and Programme type of load Any. Partial load (to be completed later in the day). Crockery, cutlery, pots and pans. Recommended programme Required Pushbuttons in the dispenser in the Super Intensity Dispenser Cycle Description 1 2 3 RINSE AND HOLD Programme Selector / 20 g / 10 g 1 cold rinse (to avoid food scraps from sticking to the dishes). INTENSIVE 70°c Programme Selector Prewash up to 55°C Main wash up to 70°C 2 cold rinses 1 hot rinse up to 65°C Thermal drying Cold prewash Main wash up to 65°C 1 cold rinse 1 hot rinse up to 65°C Thermal drying Cold prewash Main wash up to 50°C 1 cold rinse 1 hot rinse up to 55°C Thermal drying Cold prewash Main wash up to 55°C 1 cold rinse 1 hot rinse up to 55°C Thermal drying Main wash up to 50°C 1 cold rinse 1 hot rinse up to 55°C Thermal drying Main wash up to 55°C 1 cold rinse 1 hot rinse up to 55°C Thermal drying Cold prewash Main wash up to 45°C 1 cold rinse 1 hot rinse up to 55°C Thermal drying Main wash up to 55°C 1 cold rinse 1 hot rinse up to 55°C Normal soil. Crockery, cutlery, pots and pans. NORMAL WITH PREWASH 65°c Programme Selector 20 g 5g 4 5 6 7 8 Light soil. Crockery and cutlery. LIGHT WITH PREWASH 50°c Programme Selector 20 g 5g Normal soil. Crockery and cutlery. * ECONOMY WITH PREWASH 55°c LIGHT NO PREWASH 50°c ECONOMY NO PREWASH 55°c DELICATE WITH PREWASH 45°c Programme Selector 20 g 5g Light soil. Crockery and cutlery. Programme Selector 20 g / / / Normal soil. Crockery and cutlery. Programme Selector 20 g Light soil. China and glassware with delicate decorations. Crockery and party crockery Programme Selector 15 g 9 ** QUICK WASH 55°c Programme Selector 15 g / * This programme is equivalent to IEC436 standard Standard place setting: 9 Recommended quantity of detergent: 20 g in the dispenser 5 g in the Super Intensity Dispenser (SID). ** This is a special programme for quick washing (approx. 46 minutes) a full load of lightly soiled dishes, glasses and crockery (except pots) so that you may re-use them promptly. PTP11GB 1 Operating Sequence 1. Check that the filters are clean (see cleaning instructions) 7. [. . . ] No further openings for venting of the dishwasher are required, but only to let the water fill and drain hoses and power supply cable pass through. 450 Mounting of decor panel onto the door The height of the panel depends on the height of the plinth of adjacent kitchen units (see kitchen plinth adjustment). 446 max 148 * 0 ÷ 60mm II27 360 * 818÷878 555x ma 820÷880 446 The panel must be fitted with a handle, as the dishwasher handle will be hidden by the panel. Drill the panel with a Ø 2x12 bit according to the dimensions indicated in the figure. II33 II06 Fix the cross bar onto the panel using four 3. 5x16 screws provided. Reduce the length of fixing screws according to thickness of panel. If for aesthetic matching the panel is provided with a false drawer (fitted or carved on the panel itself), the two brackets provided should also be used. = 30 40 The recess height may be anywhere between 820 and 880 mm from the floor since the dishwasher incorporates levelling feet adjustable over a wide range (max 60 mm). [. . . ]