User manual ZANUSSI ZME2002V

[. . . ] · The appliance must not be used as a work surface or as a storage surface. · Additions or modifications to the appliance are not permitted. · Do not place or store flammable liquids, highly inflammable materials or fusible objects (e. g. [. . . ] Wipe the appliance with a damp cloth and a little washing up liquid. Rub the appliance dry using a clean cloth. Removing deposits 1. Remove heavy deposits from the hotplates using fine scouring powder or a scouring pad. Then heat the hotplate to a low temperature and leave to dry. To maintain the hotplates, rub in a little sewing machine oil now and again and then polish off with absorbent paper. 1 Important: Do not clean the stainless steel edge of the hob with scouring powder or a scouring pad as this will leave scratches!For stainless steel hobs only use suitable stainless steel cleaning and maintenance products. Please the manufacturer's instructions. 3 The stainless steel edge of the plate can be slightly discoloured as a result of thermal load. This process is caused by the physical properties. 17 What to do if . . . Problem The hotplates are not functioning Possible cause The combination appliance is not switched on The desired heat setting is not set. Set the heat setting. The fuse in the house's electrical Check the fuse. If the fuses trip a number of times, please call an authorised electrician. If you are unable to remedy the problem by following the above suggestions, please contact your dealer or the Customer Care Department. 1 Warning!Repairs to the appliance are only to be carried out by qualified service engineers. 3 If the appliance has been wrongly operated, Considerable danger to the user may result from improper repairs. the visit from the customer service technician or dealer may not take place free of charge, even during the warranty period. 18 Disposal 2 Packaging material The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e. g. Please dispose of the packaging materials in the appropriate container at the community waste disposal facilities. 2 Old appliance The symbol on the product or on its packaging indicates that this product may not be treated as household waste. [. . . ] A device must be provided in the electrical installation which allows the appliance to be disconnected from the mains at all poles with a contact opening width of at least 3 mm. Suitable isolation devices include line protecting cutouts, fuses (screw type fuses are to be removed from the holder), earth leakage trips and contactors. 20 Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions (section "What to do if. . . "). If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners. [. . . ]