User manual ZANUSSI ZV1020S

[. . . ] GEFRIERSCHRANK CONGELATEUR DIEPVRIEZER FREEZER ZV 1020 S BEDIENUNGSANLEITUNG 2222 132-02 MODE D'EMPLOI GEBRUIKSAANWIJZING INSTRUCTION BOOKLET CONTENTS Warnings . Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page 35 36 36 36 36 37 37 38 39 39 39 39 39 39 40 40 41 41 41 42 42 42 42 42 Installation . Location . Electrical connection . Cleaning the appliance's interior . Changing the opening direction of the door . Aligning the worktop of the appliance with the kitchen furniture Installation under the kitchen's work-top . . Control panel Starting-up and temperature regulation . [. . . ] 1) on the opposite side by using the screws previously removed. To do this, press it in the direction of the arrow. Introduce the plug into the hole left free on the opposite side. Reverse the direction of the handle (Fig. 2 B A The unused opening direction is concealed by plastic plugs. Therefore, these plugs are to be mounted on the holes left free. Fig. 3 Aligning the worktop of the appliance with the kitchen furniture The appliance worktop is aligned with the door. It can however be easily aligned to the kitchen furniture by proceeding as follows: unscrew the screws on the upper hinges (F-Fig. 4) that fasten the worktop to the appliance. Move the worktop to the desired position and tighten the screws again. D162 37 Installation under the kitchen's work-top Open the door. Remove from the upper hinges the screws (FFig. 4) that fix the appliance's work-top. Push the work-top (G) toward the back of the appliance and remove it. Remove the work-top's brackets (H) from the appliance. Unscrew the feet and fit them in the openings situated immediately behind (see Figure 5). Fix the appliance to the kitchen's work-top, using the openings on the upper hinges. A ventilation opening must be made on the back of the kitchen's work-top (Fig. This opening must have the same dimensions and the same position as the grid on the appliance's work-top previously removed. D155 Fig. 6 D157 38 USE The freezer is marked with the symbol, which means that the compartment is suitable for freezing fresh food and for long-term storage of frozen food. Control panel (Fig. Quick freezing switch S N 2 1 3 4 E D C C. Quick freezing pilot lamp B A Fig. 7 Starting-up and temperature regulation Insert the plug into the wall socket, the pilot light (C) will light up to show that the appliance is working. [. . . ] Otherwise they should be used up very quickly. Positioning the cold accumulator Pull out the bottom drawer. 9) which is placed on the floor of the compartment for safety reasons during transport. 9): this is its correct position when the appliance is in operation. 9 Ice cube trays The appliance includes one tray for producing ice cubes. [. . . ]