User manual ZANUSSI ZVF36RF

[. . . ] Children should not be allowed to tamper with the controls or play with the product. It is dangerous to alter the specifications or modify this product in any way. Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Before any cleaning or maintenance work is carried out, be sure to switch off and unplug the appliance. [. . . ] For this purpose the supply cable plug incorporates a special earth contact. If the sockets of your domestic wiring system are not earthed, have the appliance connected to a separate earth wire by a qualified electrician in accordance with existing safety regulations. The Manufacturer declines all responsibility if the above safety precautions are not observed. This appliance complies with EEC directive number 87/308 of 2/6/87 relative to radio interference suppression. This appliance complies with the following E. E. C. Directives: - 73/23 EEC of 19. 2. 73 (Low Voltage Directive) and subsequent modifications; - 89/336 EEC of 3. 5. 89 (Electromagnetic Compatibility Directive) and subsequent modifications. Cleaning the interior Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand-new product, then dry thoroughly. Do not use detergents or abrasive powders, as these will damage the finish. 38 Changing the opening direction of the door Unplug the freezer before performing the following operations: Remove the ventilation grill (D-Fig. Remove the door from the upper pivot (A-Fig. Remove the pivot and the washer (A+B-Fig. 3) from the upper hinge (C), then mount these on the opposite side. 2) on the opposite side by using the screws previously removed. Wait until the temperature alarm light (C) turns off when the optimum temperature has been reached. Thermostat settings may be modified according to the surrounding room temperature, the location of the freezer and the frequency of door openings, etc. To turn off the freezer, turn the thermostat knob to the «O» position. The temperature alarm light (C) The temperature alarm light turns on automatically whenever the temperature within the freezer rises above a certain value which might endanger satisfactory long-term conservation. It is perfectly normal for the temperature alarm light to remain lit up for a short time after the freezer is initially turned on. It will remain lit up until the optimum temperature for the conservation of frozen food is attained. Internal thermometer (if supplied with the appliance) This indicates the internal temperature of the freezer. It may indicate a temperature above ­18°C when large quantities of food are placed inside for freezing or when the door is left open for a long time. 7 °C -30 -18 0 Quick-freezing For quick-freezing, turn the N/S knob (D) to the «S» symbol. The quick-freezing indicator light (B) will then light up. D072 41 Freezing food Set the freezer to quick-freezing operational status. Wait at least 3 hours before introducing fresh foods into the freezer if it has only recently been turned on. If the freezer has already been working for some time, turn the respective knob to the «S» position at least 24 hours before introducing the food into the freezer in order to ensure better freezing results. This period of time may be shortened according to the quantity of food. [. . . ] Foods to be frozen must be enclosed in air-tight sacks or containers especially indicated for this purpose. Close these sacks or containers tightly to eliminate all air. Never place bottles or cans of carbonated beverages in the freezer. Never fill the freezing sacks or containers with covers to the brim. [. . . ]