User manual ZEBRA ZBI-DEVELOPER

[. . . ] ZBI-DeveloperTM User Guide 48789L-002 © 2009 ZIH Corp. The copyrights in this manual and the software and/or firmware in the label printer described therein are owned by ZIH Corp. Unauthorized reproduction of this manual or the software and/or firmware in the label printer may result in imprisonment of up to one year and fines of up to $10, 000 (17 U. S. C. 506). Copyright violators may be subject to civil liability. [. . . ] In the Search Type dialog, select Local Broadcast. The Value fields are automatically populated. 2. Type a name in the Search Group Name textbox. 48789L-002 ZBI-Developer User Guide 5/14/09 ZBI-Developer Configuration of ZBI-Developer 51 3. The Value field is added to Search type. Click OK to exit the Preferences dialog. Subnet Search The Subnet Search sends a discovery request to each address in the specified subnet. This feature is useful for networks that prevent broadcast packets from passing across routers. The Subnet search requires you to type in the first three subnet octets. Example · A request to 192. 168. 2. * sends a request to: 192. 168. 2. 1 through 192. 168. 2. 254. To create a Subnet Search, do the following: 1. From the Search Type dialog, select Subnet. Type a name in the Search Group Name textbox. In the Value field, type the first three subnet octets. Click OK to exit the Preferences dialog. Directed Broadcast Search Directed broadcasts send a discovery request to the broadcast address of the specified subnet. Note · If a broadcast search does not work, the broadcast packets might be disabled across routers. Try Multicast or Subnet search. Example · The directed broadcast search requires you to type in the first three subnet octets, followed by 255, such as 192. 168. 2. 255. To create a Directed Broadcast search, do the following: 1. In the Search Type dialog, select Directed Broadcast. The fourth octet of the Value field is automatically populated. 2. In the Value field, type the first three subnet octets. Type a name in the Search Group Name textbox. Click OK to exit the Preferences dialog. 5/14/09 ZBI-Developer User Guide 48789L-002 52 ZBI-Developer Configuration of ZBI-Developer Multicast Search Multicast uses the multicast address to send a discovery address to all Zebra printers across as many routers as the hop count specifies. A multicast search may return a large number of printers in some installations. This feature might be disabled on some routers and switches. See your network administrator to determine if a search failure was due to this feature being disabled. To create a multicast search, do the following: 1. In the Search Type dialog, select Multicast (Hops). [. . . ] This approach is recommended when program development and encryption will be done from remote locations. · The key file can be stored on a networked drive, made available to any of the programmers to use. 5/14/09 ZBI-Developer User Guide 48789L-002 88 ZBI-Developer Encryption of ZBI Programs Encrypt a ZBI Program To encrypt a ZBI program, right-click over the program and choose Encrypt ZBI Program. The program will display a Warning dialog as shown below: Next, the program will offer the choice to use the Default Encryption Key or to Generate a New Key. Note · It is recommended that the Default Encryption Key be used rather than creating additional keys. This approach is recommended to make the task of managing the keys easier over time. [. . . ]