Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ZENEC ZE-100DVD. We hope that this ZENEC ZE-100DVD user guide will be useful to you.
Lastmanuals help download the user guide ZENEC ZE-100DVD.
Detailed instructions for use are in the User's Guide.
[. . . ] I It's mandatory to closely follow this installation guide step-by-step. Even a small deviation may render your device permanently unusable. [. . . ] I Do not unplug your USB data carrier during the update process. I Do not use any updates which are not expressively certified for your ZE-100DVD (i. e. If you deviate from these step-by-step instructions, you will void your warranty and risk to damage your device. In that case ZENEC will not take any responsibility. Installation of the firmware updates: The update software consists of three parts on three sticks i. e. Make absolutely sure that you install all software parts following the below mentioned installation sequence: 1. MCU
Caution: Ensure your cell phone is switched off during the entire update process any Bluetooth activities, as Bluetooth coupled phones receiving incoming calls, are prone to fatally interrupt the update process. Check version After you applied all three software updates you need to perform a version check. BT Version Check BT version with: Bluetooth> Setup >Seite2 > Version Bluetooth software check after a successful update should say: HW100-SW360 MCU and MPEG Version In order to check the MCU and MPEG versions you need the remote control. Type the following keys using the remote control: a) b) c) d) e) f) g) h) i) 2X 1X 1X 1X 1X 1X 1X 1X 1X [STOP] [+] [UP] [+] [DOWN] [+] [LEFT] [+] [RIGHT]
Only version numbers of the MCU, MPEG (marked as DN) are of interest. After a successful update the software version screen should say: DN (i. e. MPEG) : 2. 06 MCU : 2. 08 If any deviation from the above mentioned status should occur, you can fix it by reapplying the respective part of the software. After doing so, reassure yourself by repeating the version check until you get the desired result. CAUTION : If one or even more of the partial updates fail, you may encounter strange erratic behaviour of your unit. [. . . ] After doing so, reassure yourself by repeating the version check until you get the desired result. CAUTION : If one or even more of the partial updates fail, you may encounter strange erratic behaviour of your unit. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ZENEC ZE-100DVD
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ZENEC ZE-100DVD will begin.
