User manual ZENITH DVT310 OPERATING GUIDE

[. . . ] Installation and Operating Guide | Warranty Model Number | DVT310 | DVD/CD Receiver (Speakers: LHS-D6235T/LHS-D6235W) © Copyright 2003, Zenith Electronics Corporation Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in a confined space such as a book case or similar unit. REGULATORY INFORMATION: FCC Part 15 This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] When you have already registered a password; Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security password, then press ENTER. If you make a mistake before pressing ENTER, press CLEAR and enter 4-digit security password again. 4 Select Country 1 the setup menu. Code using the 3/4 buttons on 2 While Country Code is selected, press 2. 3 Follow step 3 of "Rating" on left. 4 4 Select the first character using the 3/4 buttons. cursor using 2 button and 5 Shift thecharacter using 3/4 buttons. select the 4 second Press ENTER to confirm your country code 6 selection, then press SETUP to exit the menu. ote Confirmation of the 4-digit password is necessary when the code is changed (see "Changing the 4-digit code" below. ). Changing the 4-digit code 1 Follow Steps 1-2 as shown above to the left (Rating). 4 3 Select Change using 3/4 buttons then press ENTER. 4 Enter the new 4-digit code, then press ENTER. 5 Enter exactly the same code a second time and verify by pressing ENTER. 6 Press SETUP to exit the menu. 4 Select a rating from 1 to 8 the 3/4 but4 tons. Onehas the mostleast using restrictions. Eight (8) playback Unlock: If you select Unlock, Parental Control is not active. Ratings 1 to 8: Some discs contain scenes not suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will be played. Higher rated scenes will not be played unless an alternative scene is available on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found, playback will stop. You must enter the 4-digit password or change the rating level in order to play the disc. If you forget your 4-digit code If you forget your password, to clear the current password, follow the procedure below. 1 Press SETUP to display the Setup menu. 2 Use the Number buttons to enter the 6-digit number "210499". The 4-digit password is cleared. 5 Press ENTER to confirm your rating selection, then press SETUP to exit the menu. 3 Enter a new code as shown above to the left (Rating). ote This function may not work for some DVDs. 19 SYSTEM SETUP Enter the code of a country/area whose standards were used to rate the DVD video disc, referring to the list (See "Country Code List", page 31. ). DVD Operation Playing a DVD Playback Setup DVD General Features ote Unless stated otherwise, all operations described use the remote control. Some features may also be available on the Setup menu. Turn on the TV and select the video input source connected to the DVD/CD receiver. Audio system: Turn on the audio system and select the input source connected to the DVD/CD receiver. Moving to another TITLE 1 /3 DVD 1 chosen disc in the 2 Load yourside facing down. tray, with the playback OPEN/CLOSE the tray. [. . . ] The remote control does not work properly. · The remote control is not pointed at the DVD/CD receiver remote sensor. · The remote control is too far from the DVD/CD receiver. · There is an obstacle in the path of the remote control and the DVD/CD receiver. [. . . ]