User manual ZENITH HW20H52DT11

[. . . ] Installation and Operating Guide Warranty Model Number H20H52DT HW20H52DT zenith ® Please read this manual carefully before operating your set. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. table of contents page 5 Internet Home Page : http://www. zenith. com P/N : 3828VA0518B a (FCH-50) For Customer Support/Service please call: 1-888-865-3026 www. zenith. com WARNING RISK OF ELECTRIC SHOCK RECORD THE MODEL NUMBER The serial number of this HealthViewTM TV is located on the back of the cabinet. For future reference, we suggest that you record the serial number here: MODEL NO. [. . . ] Their numbers, descriptions, ranges, factory default settings, and a place for listing any changes made on-site are given below. A second section of the Installer's Menu that is intended for qualified service technicians only is not shown (XX-F Items). Normally these items do not require adjustment. Items in the Installer's Menu: 0-I to 25-I Menu Item 0-I. SEQ POWER MANAGE AC ON BAND/AFC STRT CHANNEL CHAN LOCK GHOST CH START VOLUME MIN VOLUME MAX VOLUME MUTE DISABLE KEY DEFEAT IR BANKS EN. TIMER ALARM RADIO NOT USED FEATURE LEVEL V-CHIP MAX BLK HRS CAPTION LOCK TEXT MODE FUNCTION PRE. 0 0/1 0/1 0 - 99 0/1 0/1 0-3 1 Zen 1 1 12 0 1 0 Leave default set 1 (1 Zen 1) Set to 1 to enable V-Chip Select number of Parental Control blocking hours. Set to 1 to retain caption setting at turn off. Set to 1 to add Text option to closed caption menu. Controls channel preview in Pay-Per-View function menu. Value Range 0-3 0-7 0/1 0-7 0 - 255 0/1 0/1 0 - 63, 255 0 - 63 0 - 63 0/1 0/1 0/1 0-3 0/1 0/1 0/1 0/1 0/1 Default Value 0 0 0 0 255 0 0 255 0 63 0 1 0 1 0 1 1 1 1 Brief Description of Function and Comments Changes installer Entry Sequece. Leave default set 0 0 ( 9876), 1 (4321), 2 (1478), 3 (3698) Sets number of hours of no activity before auto shutoff. Set to 1 to enable auto turn on at power up. When set to 1, cannot tune from current channel. Set to 1 to enable Ghost Channel display. Volume level at TV turn-on (Set 255 to r etain last volume level). Set to 1 to disable M enu, Select, and Adj keys on front panel. Set to 1: enables TV to respond to IR codes to change Channel Bank directly. Typically used for Hospitals: puts On-Off and FM in Ch Up/Down sequen ce. Set to 1 to put TV on/o ff below start channel number. Set to 1 for TVs with Radio. OIMCRMIO62A 01. 48 01 00-I. INST . SEQ. 0 SN:XXXX-XXXXXXXX UPN:XXX-XXX-XXX-XXX XX/XX/XX TE = 10110000 XX-F Menu Items (Not shown here) are service-type adjustments and only qualified technicians having specialized test equipment should access them. Page 31 Installer Menus Installer Menu Item 26-I through 63-I. Menu Item 26-I. OVER RIDE OLD OCV ACK MASK POLL RATE TIMING PULSE NOT USED NOT USED NOT USED NOT USED NOT USED NOT USED REAR VIDEO EN NOT USED NOT USED NOT USED NOT USED NOT USED NOT USED NOT USED NOT USED DIS. [. . . ] Device that picks up the audio/video signal and turns it into picture and sound. Extended Data Service: Additional program information if provided by the broadcaster. 300 TO 75 OHM ADAPTER A/V DEVICE ADD AMPLIFIER ANTENNA AUTO PROGRAM DELETE INPUT JACK MONO SOUND M. P. I. OUTPUT SIGNAL TUNER XDS Page 51 WARRANTY Direct-View Welcome to the Zenith family!We believe that you will be pleased with your new TV. Color TV Please read this warranty carefully, it is a "LIMITED WARRANTY" as defined under Federal Law. [. . . ]