User manual ZENITH IQDVC2350 OPERATING GUIDE

[. . . ] machine number | IQDVC2350 enjoy the view ® operating guide / warranty PAGE 2 INTRODUCTION Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVERTISSEMENT RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated `dangerous voltage' within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: CAUTION: ATTENTION: CAUTION: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. [. . . ] Doing so may cause the DVD player to malfunction. Do not push up the disc tray or put any objects other than discs on the disc tray. Doing so may cause the DVD video player to malfunction. Keep your fingers well clear of the disc tray as it is closing. Be especially careful with children's fingers around the closing disc tray as there is a risk of personal injury. When " " appears on the TV screen while a button is pressed, it means that this function is not available on the disc you are playing. Depending on the DVD disc, some operations may be different or restricted. Refer to the jacket or case of the disc you are playing. audio subtitle angle marker-search repeat a-b random zoom slow/scan rev fwd BASIC OPERATION PAGE 21 Basic Playback Stopping Play Press STOP during playback. Resume Play power dvd vcr catv tv q When play is stopped, the unit records the point where STOP was pressed (RESUME function). Press PLAY and play will resume from this point. PLAY play Notes Resume function will be cleared when the STOP is pressed on the STOP mode. Resume function will be cleared when the power is turned off and then on. Opening the disc tray cancels Resume function. The Resume function may not be available on some DVD discs. If the player is left in the stop mode for more than 8 minutes, the power shuts off automatically. REV SKIP STOP PAUSE/ STEP pause /step skip stop select/ enter skip FWD SKIP open/close ch vol setup vol ch display return/tv input 1 4 7 clear 2 5 8 0 3 sound/mute Still Picture (Pause) Press PAUSE/STEP during playback. q 6 program 9 title menu audio subtitle angle marker-search DVD The player will be placed in the still picture mode. q CD The player will be placed in the pause mode. repeat a-b random zoom Frame advance (DVD only) slow/scan rev fwd Press PAUSE/STEP during still playback. (Each time you press PAUSE/STEP, the picture advance one frame) To resume normal playback, press PLAY. Skipping forward or back Skipping forward Press SKIP during playback. A chapter (DVD) or a track (CD) is skipped each time the button is pressed. Skipping back Press SKIP during playback. q When the button is pressed once midway through a chapter/track, the player returns to the start of that chapter/track. When it is pressed again, a chapter/track is skipped each time the button is pressed. PAGE 22 BASIC OPERATION Various speed playback with Shuttle Ring You can play back discs at various speeds, and resume normal playback. To play in slow-motion During still picture mode, rotate and hold SHUTTLE ring to the positions indicated gives those slow modes. power dvd vcr catv tv q The variable-speed slow picture will appear on the TV screen. PLAY play Release the SHUTTLE ring to resume the still picture mode. 1/16 1/8 1/16 1/8 skip stop pause /step select/ enter skip open/close 1/4 1/4 ch vol setup vol ch 1/2 1/2 display return/tv input 1 4 7 clear 2 5 8 0 3 sound/mute REVERSE DIRECTION FORWARD DIRECTION 6 program 9 title menu audio subtitle angle marker-search repeat a-b random zoom To scan at fast forward or fast reverse. During playback mode, rotate and hold SHUTTLE ring to the positions indicated gives those fast search modes. q The variable-speed search picture will appear on the TV screen. slow/scan rev fwd SLOW/SCAN Shuttle ring Release the SHUTTLE ring to resume normal playback. G FF X2 GG X2 FF X4 GG X4 FF X16 GG X16 FF X100 GG X100 REVERSE DIRECTION FORWARD DIRECTION Notes The DVD player does not play back sound during slow-motion playback, the high speed reverse and forward playback of DVD video discs. However, the DVD player plays back sound during fast forward or fast reverse playback of audio CDs. Subtitles do not appear on the screen during slow motion and scan playback. The DVD player provides four (4) scan speeds for DVD movie play. Only two (2) scan speeds are available during Audio CD play. The DVD player does not play back in slow-motion in case of audio CD. OPERATION USING GUI MENU ICONS PAGE 23 General Information about GUI menu icons This unit features GUI Menu Icons showing disc information (title/chapter/track number, elapsed playing time, audio/subtitle language, angle, and sound) and player information (repeat play, play mode, marker, etc. ). [. . . ] Other Remotes with 3, 4, 5 & 7 Functions Available Upon Request ZEN 525 ONLY $19. 99 PLUS $6. 95 SHIPPING & HANDLING zenith ORDER TODAY!CALL OR FAX TOLL-FREE 1. 800. 255. 6790 Fax 1. 888. 693. 6484 email: parts. sales@zenith. com Use Your Visa or MasterCard to Order PLEASE ALLOW 3 - 4 WEEKS FOR DELIVERY Your Zenith Limited Warranty DVD PLAYER Welcome into the Zenith family!We believe that you will be pleased with your new Zenith Entertainment Machine. Please read this warranty carefully, it is a "LIMITED WARRANTY" as defined under Federal Law. [. . . ]