User manual ZENITH VCP352 OPERATING GUIDE

[. . . ] VCP352 High Quality (HQ) Circuitry VHS Video Cassette Player Operating Guide & Warranty ® ® THE QUALITY GOES IN BEFORE THE NAME GOES ON Return the Product Registration Card and your VCP could be Free! SAFETY WARNINGS WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO PREVENT FIRE OF SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. POWER CORD POLARIZATION CAUTION To prevent electric shock, match wide blade of plug to wide slot, fully insert. ATTENTION Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu'au fond. Note to Cable TV System Installer This reminder is provided to call the cable TV installer's attention to Article 820-40 of the National Electrical Code (U. S. A. ). [. . . ] Keep power on at room temperature until indicator turns off. The VCP will not operate if the DEW indicator is on. -9- 7 8 PLAY/A. TRK (Auto Tracking) Indicator Indicates tape is playing and tracking automatically. FF (Fast Forward) Indicator Indicates tape is fast forwarding. (Auto) REPEAT Indicator Indicates automatic repeat is active. Tape will automatically rewind when it reaches the end, then begin to play again. STILL Press during tape playback to pause the tape and "freeze" the picture. If left in the Still mode for five minutes, the VCP will automatically go into Stop mode to protect the tape and the VCP from possible damage. (continued on next page) OPERATION 9 (continued) high speed (the sound is muted). Press and hold down FF to play the tape at Jet Search speed, release for normal playback. Press STOP to end fast forward or search. 12 Cassette Loading Compartment Insert a VHS video cassette into the video cassette compartment until it is automatically drawn into the VCP. The cassette can be inserted even when power is off. Power turns on automatically and playback begins. CAUTION; DO NOT attempt to insert a cassette into the compartment when the power cord is unplugged. CAUTION; DO NOT insert fingers into the cassette compartment. REW (Rewind/Reverse Search) Button Press while the VCP is in Stop mode to rewind the tape (no picture, no sound). During tape playback, press to begin Reverse Search; The picture portion of the tape is played in the reverse direction at high speed (sound is muted). Press and hold down REW to rewind the tape at Jet Search speed, release for normal playback. The correct playback speed is automatically selected. 11 FF (Fast Forward/Forward Search) Press while the VCP is in the Stop mode to fast forward the tape (no picture or sound). During tape playback, press to begin Forward search; The picture portion of the tape is played at Playing a Video Cassette · · Turn on the TV. If the VCP is connected to the TV via the RF OUT jack, tune the TV to the same channel (3 or 4) as the Channel 3/4 switch on the back of the VCP. [. . . ] or Canadian Zenith authorized service center for warranty service and must be picked up by the owner. TV Set Performance -- It is the owner's responsibility to maintain the TV receiver with which the video product is used, and the associated antenna system, in proper operating condition. Important: Product Registration -- Please fill out and mail your Product Registration Card. It is imperative that Zenith know how to reach you promptly if we should discover a safety problem that could affect you. [. . . ]