User manual ZENITH XBV322 OPERATING GUIDE

[. . . ] Installation and Operating Guide | Warranty Model Number | XBV322 | DVD Player + Video Cassette Recorder © Copyright 2003, Zenith Electronics Corporation. Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. [. . . ] 4 Select(8)has thefrom 1playback restrictions. One (1) least Eight has the most playback restrictions. Unlock: If you select Unlock, Parental Control is not active. Ratings 1 to 8: Some discs contain scenes not suitable for children. If you set a rating for the DVD+VCR, all disc scenes with the same rating or lower will be played. Higher rated scenes will not be played unless an alternative scene is available on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found, playback will stop. You must enter the 4-digit password or change the rating level in order to play the disc. to confirm your 5 Press SELECT/ENTERSETUP to exit therating selection, then press menu. If you forget your 4-digit password If you forget your password, to clear the current password follow the procedure below. 1 Press SETUP to display the setup menu. 2 Enter the 6-digit number 210499. The 4-digit password is cleared. 3 Enter a new password as shown above to the left (Rating). 20 Tape Operation Normal Playback Preparation: Turn on the TV. Tune the TV to the DVD+VCR output channel (CH 3 or 4) or set the TV's source selector to VIDEO. If a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV, set the TV's source selector to VIDEO. Set the Output Source to VCR as shown in "Selecting the Output Source" on page 6. Search This function lets you quickly and visually search for a desired tape section in either direction: forward or reverse. 1 Press BACKWARD (. ) or FORWARD (>) during playback. The DVD+VCR will be activated in the SEARCH mode. If the DVD+VCR is left in the SEARCH mode for more than 3 minutes, the DVD+VCR will automatically enter the PLAY mode, to protect the tape and video heads. 1 Insert a prerecorded video cassette. The indicator will light and the DVD+VCR will power-up automatically. Make sure that the indicator in the display window is not lighted. If a tape without a safety tab is inserted, the unit will start playback automatically. 2 To return to playback, press PLAY (H). Still Picture and Frame-by-Frame Playback 1 Press PAUSE/STEP (X) during playback. Still picture will appear on the TV screen. If a still picture vibrates vertically, stabilize it using v/V on the remote control. If the DVD+VCR is left in the STILL mode for more than 5 minutes, the DVD+VCR will automatically enter the STOP mode to protect the tape and video heads. 2 Press PAUSE/STEP (X) repeatedly to advance the PLAY (H once. [. . . ] HOW SERVICE IS HANDLED: This is an Exchange Product. Call 1-877-993-6484 for instructions on getting the defective unit repaired. Please retain dated sales receipt and your box to return the unit to Zenith for replacement. Shipping charges both ways will be paid by Zenith during the first 90 days of the Warranty Period. [. . . ]