User manual ZOJIRUSHI NS-DAC10

[. . . ] 40 – 46 FOR RECORDING . . . . . . . . . . . . . . . . 47 – 57 DUBBING . . . . . . . . . . . . . . . . . . . . . . . . . 58 – 61 USING THE REMOTE CONTROL UNIT . . . . . . . . . . . . . . . . 62 – 73 SYSTEM CONNECTIONS . . . . . . . . [. . . ] “ HALOGEN” – A video light or similar type of lighting is used. The Menu Screen closes and the selected mode indicator except “AUTO” appears. White paper MENU Button +, – Button 5 SET/SELECT Button Power Switch To Return To Automatic White Balance . Or, set the Power Switch to “ ”. NOTE: White balance cannot be used when Sepia or Monotone (੬ pg. 49) is activated. NOTES: ● In step 2, it may be difficult to focus on the white paper. In such a case, adjust focus manually (੬ pg. ● A subject can be shot under various types of lighting conditions indoors (natural, flourescent, candlelight, etc. ). Because the color temperature is different depending on the light source, the subject tint will differ depending on the white balance settings. Use this function for a more natural result. ● Once you adjust white balance manually, the setting is retained even if the power is turned off or the battery removed. 56 INDEX Button EN MENU Button +, – Button VIDEO/MEMORY Switch FOR RECORDING (cont. ) Digital Sound Effects 12 sound effects (EXPLOSION, SIREN, LAUGHTER, RACE CAR, DOOR BELL, BUZZER, FANFARE, APPLAUSE, CHEERS, BOING, SCREAM and JEERS) prestored in the provided memory card can be dubbed onto a tape. SOUND EFFECT MODE SELECTION Power Switch SET/SELECT Button D. SOUND Button Lock Button Display EXIT EXPLOSION 1 2 3 4 5 Load the provided memory card (੬ pg. Set the VIDEO/MEMORY Switch to “VIDEO”, then set the Power Switch to “ ” or “ ” while pressing down the Lock Button located on the switch. Open the LCD monitor fully or pull out the viewfinder fully. Once it is reached, press 4/6 on the camcorder. Press 4/6 on the camcorder and engage the VCR’s Record mode. Engage the VCR’s Record-Pause mode and press 4/6 on the camcorder. Repeat steps 4 through 6 for additional editing, then stop the VCR and camcorder when finished. Docking Station Audio/Video cable [mini-plug to RCA plug] (provided) S-Video cable To AUDIO, VIDEO* IN (optional) To S-VIDEO IN TV VCR * Connect when an S-Video cable is not used. NOTES: ● It is recommended to use the AC Power Adapter/Charger as the power supply instead of the battery pack (੬ pg. ● As the camcorder starts to play your footage it will appear on your TV. This will confirm the connections and the AUX channel for dubbing purposes. ● Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do, they are being recorded onto the new tape. To choose whether or not the following displays appear on the connected TV . set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the Menu Screen (੬ pg. set “TIME CODE” to “ON” or “OFF” in the Menu Screen (੬ pg. [. . . ] 49 Set Remote Control/VCR Code . . . . . . . . . . . . . . . . . . 69 Shuttle Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Shutter Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Slow-Motion Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]