User manual ZONET ZSR4134WE

[. . . ] Copyright Statement is the registered trademark of Zonet Technology Inc. All the products and product names mentioned herein are the trademarks or registered trademarks of their respective holders. Copyright of the whole product as integration, including its accessories and software, belongs to Zonet Technology Inc. Without the permission of Zonet Technology Inc. , any individual or party is not allowed to copy, plagiarize, imitate or translate it into other languages. Table of Contents Chapter 1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] At the same time, the connecting device should be in Lazy, Repeater or Bridge mode. Repeater Mode: You can select the mode to extend the distance between the two WLAN devices. Functioning as a WDS repeater, ZSR4134WE connects to both a client card as an AP and to another AP. In typical repeater applications, APs connecting to other APs equipped with WDS functionality must also support WDS. In this mode, you need to add the MAC address of the connecting device into ZSR4134WE's AP MAC address table and the connecting client should be in Lazy, Repeater or client mode. Encrypt Type: You can select from WEP mode, TKIP mode, AES mode for security here. Pass phrase: Enter the key, the key format according to encryption you selected. AP MAC: Input the MAC address of another wireless router. NOTE: Two wireless routers must use the same band, channel number, and security setting. 29 Advanced Wireless Settings ZSR4134WE provides some advanced control of wireless parameters, if you want to configure these settings, please click "Wireless" menu on the left of web management interface, then click "Advanced Settings", and the following message will be displayed on your web browser: BG protection Mode: Auto by default. Basic Data Rates: For different requirement, you can select one of the suitable Basic Data Rates. Beacon Interval: Set the beacon interval of wireless radio. Do not modify default value if you don't know what it is, default value is 100. Fragment Threshold: Set the Fragment threshold of wireless radio. Do not modify default value if you don't know what it is, default value is 2346. RTS Threshold: Set the RTS threshold of wireless radio. Do not modify default value if you don't know what it is, default value is 2347. TX Power: You can set the output power of wireless radio. Unless you're using ZSR4134WE in a really big space, you may not have to set output power to 100%. This will enhance security (malicious / unknown users in distance will not be able to reach your ZSR4134WE). WMM Capable: It will enhance the data transfer performance of multimedia contents when they're being transferred over wireless network. If you don't know what it is / not sure if you need it, it's safe to set this option to `Enable', default value is Enable. APSD Capable: It is used for auto power-saved service. The default is disabled. 30 Wireless Access Control This function will help you to prevent unauthorized users from connecting to ZSR4134WE; only those wireless devices who have the MAC address you assigned here can gain access to your ZSR4134WE. [. . . ] I can not use E-mail and access the Internet. It happens in ADSL connection and Dynamic IP users. And you need modify the default MTU value (1492). Please in the "WAN Setting" modify the MTU value with the recommended value as 1450 or 1400. 52 Q5. [. . . ]